Showing 85–96 of 171 results

Show sidebar
Show 12 24 36
dura-stilt foot plate

Foot Plate

$19.33
Dura-Stilt replacement parts
insulation hanger adhesive

Gallon Anchor Adhesive

$82.75
Anchor adhesive is a high strength, heavy-bodied adhesive, specifically formulated for adhering anchors for hanging insulation. Anchor adhesive bonds metal and nylon anchors to metal, concrete or masonry surfaces. Can also be used to install metal or ceramic wall fixtures in tile applications. Anchor adhesive is also recommended for use as a general-purpose construction adhesive in applications requiring a high strength bond, or in applications subjected to high temperatures. Apply at room temperature and allow one day to dry before hanging insulation. One gallon adhesive used for 750-1000 anchors. SDS

Graphite Powder

$14.73
1 lb Can graphite powder reduces static electricity and friction. One or two cans should be blended with cellulose occasionally and run through blower and hose. Lubrication increases efficiency and flow. (12 cans per case). SDS
Immersion Cleaner

GSP CIRR D-BOND™ Crystalized Isocyanates & Resin Remover

$151.23 – $405.00
CIRR D-BOND™ is an Environmentally sensible, Low Temperature Immersion Cleaner to remove recently hardened and cured build up of polymers and resins from the Spray Foam Equipment, Spray Guns, Pump Packaging, Heat Exchangers, Mixing Heads, Troughs, Conveyor Parts, Side Walls, Rollers, Foam & Resin Cutting Devices and Injection Molds. Non-HAPs, Low VOC, Immersion Cleaner developed to remove polyurethane foam which has been sitting on equipment and parts for months or longer. You Now Can REPLACE solvents like Acetone, MEK, & Methylene Chloride which result in high insurance premiums, by switching to an Environmentally Safe Cleaner. CIRR D BOND™ Effectively Removes
  • Recently cured Isocyanates (A)
  • MDI and TDI esters and ethers
  • Residual of cured polyurethane
  • Cured Reactive Hot Melt Polyurethane Adhesives
  • Resins and Fiberglass (Polyester, Vinylester, Epoxy, Polyamide, Orthophthalic, Isophthalic and  Dicyclopentadiene)
  • Adhesives from roll coating and dispensing equipment, as well as other industrial adhesives
  • Coatings such as: High & Low Solid Aliphatic, Water Born Epoxy Primers, Polyurethane, Acrylic, Varnishes and Alkyl Enamel
 
Select options This product has multiple variants. The options may be chosen on the product page

GSP NZD ISO FLUSH ™ Isocyanate Resin Cleaner & Neutralizer

$97.63 – $355.00

NZD ISO FLUSH ™ Isocyanate Resin Cleaner & Neutralizer is highly effective in Flushing excess Liquid Isocyanate from processing equipment (feed lines, feed tanks, mixing and metering equipment), as well as loosening and removing partially crystalized isocyanate residue and build-up from equipment and parts. No need to pre-flush Part (A) with Mineral Oil before using NZD ISO FLUSH ™. NZD ISO FLUSH ™ effectively removes:

  • Liquid & semi-hardened Isocyanate Part (A), Polyol Part (B), Cured Polyurethane Reactive Hot Melt Adhesives from Roll Coating Equipment and Dispensing Equipment, as well as many other industrial adhesives
  • Industrial Resins such as Polyester, Vinylester, Epoxy, and Pigmented Gel Coats, as well as, Fiberglass and Resin Mixture
  • Coatings such as High & Low Solid Aliphatic, Water Borne Epoxy Primers, Polyurethane, Acrylic, Varnishes, and Alkyl Enamel

Features & Benefits

  • Low VOC
  • High Resin/Polymer loading
  • Recyclable via vacuum distillation - resulting in reduced disposal costs
  • Replaces solvents such as NMP, Acetone, MEK, Methylene Chloride
  • Low rate of evaporation
Select options This product has multiple variants. The options may be chosen on the product page

GSP Surf A Lube ™ Equipment Storage Fluid

$75.44 – $307.00
Surf A Lube ™ Equipment Storage Fluid is used as a storage fluid in Urethane Dispensing Equipment as well as Polyurea Spray Equipment. Its coalescing properties allow storage of equipment for up to 36 months. Improved Performance with a Superior Environmental Profile, SurfaLube™ is stable under normal storage conditions. Compatible with machines and transfer pumps made of Carbon Steel or Stainless Steel and Aluminum Alloys. Gentle on most O-rings, gaskets, seals and lining. Does not freeze under severe cold environment (<-90 °F). Once the hoses and polyurethane spray equipment is thoroughly flushed, SurfaLube™ is introduced to the equipment through spray lines, this helps eliminate the formation of Polyurea and Crystallized Isocyanates that may form when any remaining residue reacts with moisture in the air.
Select options This product has multiple variants. The options may be chosen on the product page

GSP Surf X Flush 2000™ Polyurethane Foam, Resin & Coating Remover

$94.88 – $345.00

SURF X FLUSH 2000™ is highly effective in Flushing, Low Pressure Spray and Immersion cleaning for significant build-up of Hardened ISO (A) Line & Hoses and overspray. It also dissolves polyurethane foam, flexible and rigid elastomer and molded polyurethane foam. Effective for both MDI and TDI esters as well as cured reactive hot melt polyurethane adhesives, and other industrial adhesives, as well as mixtures of Fiberglass and Polyester Resin, and Vinylester and Epoxy Resins.

Features & Benefits

  • Low VOC
  • High Resin/Polymer loading
  • Recyclable via vacuum distillation - resulting in reduced disposal costs
  • Residue Free
  • Replaces solvents such as NMP, BLO, Acetone, MEK, Methylene Chloride, PM Acetate and 1,1,1 Trichloroethane
  • Low rate of evaporation
  • Multi substrate - Safe of most Ferrous and non-Ferrous Metals
  • Compatible and Non-Corrosive on various metals, plastics, glass and ceramics
Select options This product has multiple variants. The options may be chosen on the product page

GSP SurfaSeal™ BioBased Lubricant

$126.50

A Specialty Lubricant that is ECO Friendly and Silicone free. This product safeguards the pump rod and packings from damage by preventing coatings from drying on the components. Furthermore, it minimizes friction, wear and abrasions on the components by providing a high lev-el of lubrication on the Displacement rod. It also prevents flash rusting, ensuring a longer lifespan for your equipment.

An ideal replacement for products containing Phthalic Acid Esters / DPHP (Di-(2-Propyl Hep-tyl) Phthalate, Tricresyl Phosphate, Trixylenyl Phosphate, and Petroleum (aromatic and aliphatic) based lubricants.

fixed utility knife

Heavy Duty Fixed Blade Knife

$4.39
These utility knives are all metal construction, rugged and heavy duty.
dura-stilt heel bracket

Heel Bracket

$8.11
Dura-Stilt replacement parts
House wrap

House Wrap

$100.00
Wraptor house wrap is a breathable cross-woven polyethylene wrap that helps prevent wall sheathing from soaking up moisture that gets behind the exterior cladding(vinyl siding, brick, etc.) Wraptor provides the tear resistance of a premium wrap at an economical price.
For use behind vinyl siding, brick, and fiber cement board.
Due to size, this item must be shipped via semi. Signature required at time of delivery. Due to expense, call for freight estimate. SDS
Select options This product has multiple variants. The options may be chosen on the product page
batt knife

Hyde Tools Square Point Knife/Batt Knife

$9.90 – $900.00
These square batt knives are made of 16 gauge steel. Excellent for cutting thick batts and rockwool. Sheaths for both 6" and 8" sold separately (UH-600, UH-800). Accu Sharp blade sharpener is great for these or any other knives. (KS-100)
Select options This product has multiple variants. The options may be chosen on the product page