Showing 73–84 of 213 results

Show sidebar
Close

Chem-Trend® SprayFoam Release

$19.26
Chem-Trend® SprayFoam Release is a blend of silicones and specialized parting agents that are specifically designed to prevent spray polyurethane foam insulation from adhering to most surfaces where the product is applied. Chem-Trend® SprayFoam Release acts as an effective barrier coat to keep overspray of polyurethane foam insulation from adhering to items such as spray equipment, tub & shower stalls and other non-porous surfaces. Chem- Trend® SprayFoam Release should not be applied to personal protective equipment. SDS
chimney balloon
Close

Chimney Balloon

$58.00$107.69

This Chimney Balloon is an inflatable plug that prevents drafts from a chimney caused by a broken, warped, or missing flue dampers. A chimney damper is made of metal and frequently heated and cooled. The chimney damper can warp or break over time and use, and this causes a cold air draft to enter the home. The Chimney Balloon stops this air leakage by acting as a chimney plug to save money, heat, and comfort. This Chimney Balloon is designed to work on small circular, rectangular or square chimney flues.

How to size:

  1. With safety goggles on, look into your chimney with a flashlight and identify the damper (a metal flap that closes the chimney), if you have one. Also, identify the most narrow section of your chimney that you can touch with a 2 foot stick.
  2. Follow these guidelines when selecting an area to install a Chimney Balloon.
  • Select an area that is not interfered with by the damper flap or any hardware.
  • The area must have about 6" in height of parallel or slightly sloping walls with significant texture for the balloon to grab and lodge in during inflation.
  • Just above the damper, or in the bottom of the smoke shelf, is often an ideal location to install a Chimney Balloon.
  • If your installation point cannot be easily touched by hand you will want to purchase an HEK Extender with your Chimney Balloon.
  1. Measure the length and depth of the location you choose to install a Chimney Balloon. It is possible to measure with a standard tape measure, but it is easier to measure with a foldable carpenters ruler.
  2. We recommend that you buy the Chimney Balloon that is exactly the same dimension of your install location. But, It is OK to buy a Chimney Balloon that is up to 6 inches larger in either dimension than your measured opening, since you will be inflating it into place.DO NOT buy a Chimney Balloon that is too small for the measured opening.
CANNOT BE SOLD IN CANADA SDS
Close

Clamp Bracket

$3.25
Dura-Stilt replacement parts
clear plastic hose connector
Close

Clear Plastic Connector

$19.63$22.03
These plastic connectors are clear to see what is inside the hose.
Closed Cell Vinyl Foam Tape
Close

Closed Cell Vinyl Foam Tape – Gray

$3.50$7.50
  • Wide Gap Closed-Cell Vinyl Foam Tape
  • Waterproof and weather-resistant.
  • Self-adhesive, just peel and press.
  • Light gray in color
Closed Cell Vinyl Foam Tape
Close

Closed Cell Vinyl Foam Tape – White

$3.50
  • Wide Gap Closed-Cell Vinyl Foam Tape
  • Waterproof and weather-resistant
  • Self-adhesive just peel and press
  • Measures 3/8" wide, 3/16" thick(height), 17' long
  • White color
Curry Comb Set
Close

Curry Comb Set 4″ & 5″

$23.95
CURRY COMB FOAM SCRAPERS(2 comb set) 1- 4" and 1-5" With Reversible Heads. Reversible Curry Combs are assembled with non-rusting spacers and riveted together for an attractive durable comb. A tension spring snugs the comb firmly on the bright metal shank pin to permanently attach the Grip-Fit polypropylene handle to the comb The shank pin allows the comb to reverse easily on the handle. The finished combs are lacquer dipped to give them a bright durable finish. They are sold in sets of 2 to take advantage of better shipping rates and can be combined with other tools for further shipping discounts. Pricing is per set quantity.
DC-315 Thermal Barrier Coating
Close

DC-315 Thermal Barrier Coating

$350.00$12,600.00

The International Building Code mandates that polyurethane spray foam be separated from the interior of the building by a 15-minute thermal barrier or other approved covering. DC315 passed certified NFPA 286 and UL 1715 by ETL over a variety of open and closed cell spray-applied urethane foams. It complies with all the requirements of 2006 IBC Section 803.2.1; 2009 IBC Section 803.1.2 and Section 2603.9; 2012 IBC Section 803.1.2 and Section 2603.10 "Special Approvals for Thermal Barriers over Foam Plastics". DC315 also meets the requirement as an Ignition Barrier per AC 377, Appendix X at an incredible spread rate of 400 sq. ft. per gallon.

Characteristics
  • Finish: Flat
  • V.O.C.: (47 g/l)
  • Volume Solids: 67%
  • Drying Time: 77F & 50% RH To touch 1-2 hours to recoat 2 to 4 hours
  • Type of Cure: Coalescence
  • Flash Point: None
  • Reducer/Cleaner: Water
  • Shelf Life: 1 year (unopened)
  • Packaging: 5  gallon pail
  • Shipping weight: 5 gallon pail - 58 lbs
  • Application: Brush, roller, conventional and airless spray
SDS
Double Bubble Foil
Close

Double Bubble Foil – 2′ x 125′

$135.00
Consists of two layers of aluminum foil laminated to two layers of polyethylene air-bubble cushioning. The bubbles form trapped air spaces to provide excellent "R" values. The solid film and foil surfaces stop convection heat loss and infiltration while the aluminum surfaces stop radiant heat by reflecting it.
Double Bubble Foil
Close

Double Bubble Foil – 4′ x 125′

$190.00
Consists of two layers of aluminum foil laminated to two layers of polyethylene air-bubble cushioning. The bubbles form trapped air spaces to provide excellent "R" values. The solid film and foil surfaces stop convection heat loss and infiltration while the aluminum surfaces stop radiant heat by reflecting it. Due to size, this item must be shipped via semi. Signature required at time of delivery. Due to expense, call for freight estimate.
Sold out
Close

Dow 1/4″ Level-R Rigid Foam Insulation Board

$90.24
LevelR™ Insulation is an extruded polystyrene (XPS) foam insulation board fan folded for easy installation over existing exterior surfaces. It is used as a rigid foam underlayment for new siding materials. It also features a crimped hinge, allowing the cladding to lie flat. LevelR™ Insulation wraps a home like a blanket. LevelR™ Insulation is 1/4" or 3/8" thick extruded polystyrene board and is produced in continuous 4' x 50' fan folded sections with 24" crimped-seam spacing. The flexibility of LevelR™ Insulation aids corner-wrapping, providing sealing effectiveness and a smooth level surface for new siding. Prices vary for AZ, CA, NV, OR, WA SDS Sold 48 per skid / 4 skid minimum. Price is for 192 pieces.
Sold out
DOW protection board
Close

DOW™ Protection Board III

$204.39
DOW™ Protection Board III is an extruded polystyrene foam insulation with plastic film on one side. Designed for use in commercial foundation waterproofing applications, DOW Protection Board III helps protect the waterproofing membrane from damage during backfill. It is recommended for perimeter concrete and masonry walls where waterproofing protection is the primary requirement. Prices vary for AZ, CA, NV, OR, WA SDS