insulation free shipping

Showing all 5 results

105 Bd Ft 2-Part Low Pressure Spray Polyurethane Foam Handi Foam

$335.38
A two-part low-pressure spray polyurethane foam kit that is used to fill and insulate large voids or surfaces. Comes complete with gun, hoses and eight tips. The product is for PROFESSIONAL USE ONLY. Due to hazardous fees, this item may ship via semi. Click here for Handi-brand Product Stewardship guidelines for safe handling. (PDF) SDS PART A (PDF) SDS PART B (PDF) * This item requires special shipping, additional charges may apply.

16lb Polyurethane Foam Kit

$230.00$240.00
UL Classified polyurethane foam kits that meet ASTM E-84 Flame Spread requirements. Cylinder foams are dispensed with a dispensing wand or professional dispensing unit.
  • 1/4" bead size: 31,347 ft.
  • 3/8" bead size: 13,914 ft.
  • 1/2" bead size: 7,827 ft.
Tack-free time is approximately 10 minutes 1" bead fully cures at room conditions in 12-24 hours, cuttable in 1 hour. Wear protective glasses or goggles, nitrile gloves, and protective clothing. Use in a well ventilated area. This product is for PROFESSIONAL USE ONLY. Due to hazardous fees, this item may ship via semi. SDS

Handi-Foam® Colorwise Snap-Tips

$20.00
Snap-Tip nozzles are a combination tip.  Snap-Tips come as a fan tip, by snapping the end fan tip off you can convert the tip to cone spray. ColorWise® Temperature Warning Nozzles change from clear to blue, indicating that the chemical has reached a cold temperature and the foam should not be dispensed.
  1. Nozzle turns blue when chemical is at a cold temperature [below 60°F (16°C)].
  2. Nozzle is blue when left in cold conditions. It will return to clear when spraying chemical at optimum chemical temperature.
  3. Provides a visual indication at the point of spraying, that the chemical is too cold.

Handi-Gun Hose Assembly

$107.69$122.18
Handi-Foam Accessories

ICP® E84 Class 1(A) HFO Low Pressure Spray Polyurethane Foam – 200 Bd. Ft.

$425.13$9,205.82
Handi-Foam two-part low-pressure spray polyurethane foam kit that is used to fill and insulate large voids or surfaces. Handi-Foam® provides excellent insulation by creating a continuous air barrier helping you seal your building's envelope.  It is dispensed using the patented Handi-Gun® dispensing unit for accurate and precise applications.  Handi-Foam Quick Cure assists in obtaining ENERGY STAR® rating and/or LEED credits.  With excellent adhesion properties, Handi-Foam® Quick Cure foam will not let you down. Kit Includes:
  • Component A
  • Component B
  • Hoses
  • Dispensing Gun
  • 8 Spray Nozzles
Installation Tips:
  • Temperature: Spray foam products are temperature sensitive.  You can spray this kit in colder outdoor temperatures, the key is to keep the core temperature of the tanks within the proper range of 75-85°F.
  • Change Nozzles: It is important to change the nozzle after you stop spraying for more than 30 seconds.  Failure to change nozzles may result in damage to the spray gun.
  • Reuse Nozzles: It is possible to clean and reuse a nozzle 2-3 times.  As soon as you are done spraying, remove the nozzle and drop it in a can of acetone.  You can also use our Handi-Cleaner to clean out uncured foam.
  • Safety Considerations: Customers that purchased item also purchased a Tyvek suit with hoodrespirator and filtersgoggles, and 2 pairs of nitrile gloves.
  • Application: Use a slow, steady, and smooth motion to spray a continuous layer when applying the foam.  Spray what appears to be just under a 1/4" thickness and it will expand and cure to roughly 1 inch.  Apply additional layers until desired thickness is achieved, allowing at least 10 minutes between layers.
  • Clean Up: You can clean up uncured foam with Handi-Cleaner. Once the foam is fully cured, you will have to remove it by mechanical means.
The product is for PROFESSIONAL USE ONLY. Due to hazardous fees, this item may ship via semi. SDS PART A SDS PART B