insulation free shipping

Showing all 5 results

Insullite Recessed Light Cover

$11.53$348.75
Insullite® Recessed Light Cover Insullite is a fire retardant cover designed to allow the installer to insulate safely and effectively around recessed lights. Research has shown that without proper insulation, areas around recessed lights can allow a large amount of heat energy to enter/escape from a building. However, insulation placed too close to lights can also be a fire hazard. When installed, Insullite allows insulation to be placed as close to the light or heat producing fixture as possible without the risk of fire.

Tenmat FF109-300 1-hour Fire Rated Light Cover

$55.00$330.00
The FF109-300 1 Hour fire rated light cover is a dome-shaped intumescent cover which has been designed to help maintain the integrity of fire rated ceilings when penetrated by recessed fixtures. The unique design gives the architect, specifier and installer more freedom in fixture selection as the covers are suited to a wide range of recessed fixtures. The flexible and lightweight nature of the fire rated light cover makes installation quick and easy, reduces the stress put on the ceiling and significantly reduces labor costs compared to standard dry-walled box constructions. The high expansion and insulating properties of the cover ensures that both, flame spread and heat transmission, are stopped for 60 minutes. Inside Height 7 3/8”, Inside Diameter 13″ Data Sheet (PDF)

Tenmat FF109-300 2-hour Fire Rated Light Cover

$65.50$524.00
The FF109X is the only two hour UL tested and approved fire barrier that can be used with a wide range of recessed lights to effectively prevent the spread of flames through a ceiling opening. Once a hole is made in the drywall to install recessed lights or speakers, the integrity of the construction and its ability to perform in a fire is reduced significantly, creating a potential fire hazard. This is the reason why the International Building Code states: “Where floor/ceiling assemblies are required to have a 1 or 2-hour fire resistance rating, recessed fixtures shall be installed such that the required fire resistance of the ceiling will not be reduced” The FF109X is two hour approved for every major ceiling assembly including gypsum, sheetrock, drywall, acoustical tiles and suspended ceilings with any joist spacing up to 24 inch on center. The enclosure is made out of an intumescent material which will be activated in case of a fire, stopping both, flame spread and heat transmission for two hours. Tenmat 2 Hour Fire Rated Light Covers are UL tested and approved for use with IC-rated recessed incandescent, fluorescent, LED light fixtures. TENMAT Fire Rated Light Covers can be used with most light manufacturer’s models and are suitable for new construction as well as remodel projects. In addition to its fire protection capabilities, the FF109X also exhibits excellent thermal and acoustical insulating properties to save energy and reduce noise. The flexible and lightweight nature of the covers makes installation quick and easy, reduces the stress put on the ceiling and significantly reduces labor costs compared to standard dry-walled box constructions. Data Sheet (PDF)

Tenmat FF109-350 1-hour Fire Rated Light Cover

$59.50$595.00
The FF109-350 1 Hour fire rated light cover is a dome-shaped intumescent cover which has been designed to help maintain the integrity of fire rated ceilings when penetrated by recessed fixtures. The unique design gives the architect, specifier and installer more freedom in fixture selection as the covers are suited to a wide range of recessed fixtures. The flexible and lightweight nature of the fire rated light cover makes installation quick and easy, reduces the stress put on the ceiling and significantly reduces labor costs compared to standard dry-walled box constructions. The high expansion and insulating properties of the cover ensures that both, flame spread and heat transmission, are stopped for 60 minutes. Inside Height 11″ Diameter 15″ Data Sheet (PDF)

Tenmat Recessed Light Cover

$19.77$395.40
The Tenmat FF130E Recessed Light Cover is made out of a fire safe material and was specifically designed to protect your light fixture from insulation in the attic and to stop unwanted air leakage through your recessed light. The FF130E has been fire and thermally tested in accordance with UL1598 and IEC 60598-1 and can be used with IC, as well as Non-IC rated recessed lights (See installation instructions for maximum lamp wattage and types). Most recessed lights are not compatible with insulation and oftentimes start cycling on/off after they have been buried with cellulose, foam, fiberglass, etc. The lights' malfunction is a concern and a safety hazard. Pushing the insulation away is not an effective solution since it creates air passages in the building envelope and wastes energy. According to the department of energy, recessed lights account for 50% of the total thermal losses of a ceiling. Tenmat, the leading manufacturer of high-temperature engineering materials and fire protection components for recessed lights specifically developed the FF130E Recessed Light Cover to solve this problem and protect lights from insulation while simultaneously allowing the insulation to be continuous and uninterrupted over the whole area of the ceiling. Due to this improved air tightness and insulation, Tenmat users experience significant energy savings, noise reduction, and draft reduction. The FF130E covers are fit within seconds and do not require any assembly or special tools.
  • Thermally tested according to UL 1598 for usage with IC and non-IC rated lights
  • Fire tested in accordance with IEC 60598-1
  • Saves energy by eliminating draft through your recessed light fixture
  • Keeps flammable insulation at a safe distance from hot recessed lights
  • Easy to fit - no assembly required
These recessed light covers are flexible and lightweight- approx 2 lbs. SDS