16lb Polyurethane Foam Kit
UL Classified polyurethane foam kits that meet ASTM E-84 Flame Spread requirements. Cylinder foams are dispensed with a dispensing wand or professional dispensing unit.
- 1/4" bead size: 31,347 ft.
- 3/8" bead size: 13,914 ft.
- 1/2" bead size: 7,827 ft.
Handi-Foam 600 Bd. Ft. 2-Part Low Pressure Spray Polyurethane Foam Kit with 15′ hose
Handi-Foam two-part low-pressure spray polyurethane foam kit that is used to fill and insulate large voids or surfaces. Handi-Foam® provides excellent insulation by creating a continuous air barrier helping you seal your building's envelope. It is dispensed using the patented Handi-Gun® dispensing unit for accurate and precise applications. Handi-Foam Quick Cure assists in obtaining ENERGY STAR® rating and/or LEED credits. With excellent adhesion properties, Handi-Foam® Quick Cure foam will not let you down. Kit Includes:
- Component A
- Component B
- Hoses
- Dispensing Gun
- 8 Spray Nozzles
- 15' hose
- Temperature: Spray foam products are temperature sensitive. You can spray this kit in colder outdoor temperatures, the key is to keep the core temperature of the tanks within the proper range of 75-85°F.
- Change Nozzles: It is important to change the nozzle after you stop spraying for more than 30 seconds. Failure to change nozzles may result in damage to the spray gun.
- Reuse Nozzles: It is possible to clean and reuse a nozzle 2-3 times. As soon as you are done spraying, remove the nozzle and drop it in a can of acetone. You can also use our Handi-Cleaner to clean out uncured foam.
- Safety Considerations: Customers that purchased item also purchased a Tyvek suit with hood, respirator and filters, goggles, and 2 pairs of nitrile gloves.
- Application: Use a slow, steady, and smooth motion to spray a continuous layer when applying the foam. Spray what appears to be just under a 1/4" thickness and it will expand and cure to roughly 1 inch. Apply additional layers until desired thickness is achieved, allowing at least 10 minutes between layers.
- Clean Up: You can clean up uncured foam with Handi-Cleaner. Once the foam is fully cured, you will have to remove it by mechanical means.
Hose Assembly For ICP 16lb Foam Kit
For use with Handi-Foam systems. SDS
ICP® E84 Class 1(A) HFO Low Pressure Spray Polyurethane Foam – 200 Bd. Ft.
Handi-Foam two-part low-pressure spray polyurethane foam kit that is used to fill and insulate large voids or surfaces. Handi-Foam® provides excellent insulation by creating a continuous air barrier helping you seal your building's envelope. It is dispensed using the patented Handi-Gun® dispensing unit for accurate and precise applications. Handi-Foam Quick Cure assists in obtaining ENERGY STAR® rating and/or LEED credits. With excellent adhesion properties, Handi-Foam® Quick Cure foam will not let you down. Kit Includes:
- Component A
- Component B
- Hoses
- Dispensing Gun
- 8 Spray Nozzles
- Temperature: Spray foam products are temperature sensitive. You can spray this kit in colder outdoor temperatures, the key is to keep the core temperature of the tanks within the proper range of 75-85°F.
- Change Nozzles: It is important to change the nozzle after you stop spraying for more than 30 seconds. Failure to change nozzles may result in damage to the spray gun.
- Reuse Nozzles: It is possible to clean and reuse a nozzle 2-3 times. As soon as you are done spraying, remove the nozzle and drop it in a can of acetone. You can also use our Handi-Cleaner to clean out uncured foam.
- Safety Considerations: Customers that purchased item also purchased a Tyvek suit with hood, respirator and filters, goggles, and 2 pairs of nitrile gloves.
- Application: Use a slow, steady, and smooth motion to spray a continuous layer when applying the foam. Spray what appears to be just under a 1/4" thickness and it will expand and cure to roughly 1 inch. Apply additional layers until desired thickness is achieved, allowing at least 10 minutes between layers.
- Clean Up: You can clean up uncured foam with Handi-Cleaner. Once the foam is fully cured, you will have to remove it by mechanical means.
ICP/Fomo® Channel Fill
**THIS IS A NON-STOCK, SPECIAL ORDER ITEM** Handi-Foam® Channel Fill low-pressure pour-in-place polyurethane foam is one of the most versatile chemically cured, two-component foam systems available. It completely fills voids and cavities of all shapes and sizes with minimal fill points. Handi-Foam Channel Fill is powered by ICP Adhesives & Sealants patented High Flow Technology®. This allows the foam to flow greater distances, making it ideal for a wide variety of applications. Common Product Uses: INSULATION COMMERCIAL & INDUSTRIAL
- Retrofitting windows
- Industrial piping
- Window mullion filling
- Air Handler/HVAC
- Metal Door Filling
- Panels
- Buoyancy for floating docks
- Extrusion and rotational molded product filling, insulation
- Post installation void filling (ie. hollow stadium seats)
- Statue repair
- Taxidermy
- Filling post/pole holes
- Insulated window weight pockets during window replacement
This product is for PROFESSIONAL USE ONLY.