Showing all 12 results

Show sidebar
foam saw replacement blades
Close

23″ Replacement Blade

$59.00
  • 23" Open CellReplacement Blade
  • Used with #SAW-230 Foam Saw
  • Sold individually
*Picture shows two blades, but blades are sold individually
24 volt Cordless Milwaukee Foam Saw
Close

24 volt Cordless Milwaukee Foam Saw

$750.00
The FOAMZALLV28 Milwaukee brand heavy-duty cordless Sawzall has a custom coupling to secure a 36" long serrated blade intended for trimming 1/2 lb spray foam. The V28 Lithium-Ion batteries provide 28 Vdc power and with a 1 1/8" stroke, making it a little easier to trim in corners and tight areas. There are (2) speed settings: 3,000 strokes per minute on the High Trigger Lock setting or 2,000 strokes per minute on the Low Trigger Lock setting. Each FOAMZALLV28 comes with carry case, custom coupling, (2) 28 Vdc Lithium-Ion batteries and (1) charger. A fully discharged battery with an internal temperature in the normal range of 32 F - 150 F will charge in about an hour. Under normal operating conditions, one battery is estimated to trim 500 - 700 square feet of excess foam. The owner's manual includes saw and battery maintenance instructions and (2) pages of safety rules and instruction that an operator must read prior to use and follow during operation. The FZBLADE shown in the photo is ordered separately.
24" Replacement Blades
Close

24″ Replacement Blades for Open Cell Foam

$24.84
The FZBLADE24 is a 24" long serrated blade for use in the FOAMZALL foam saw. This 24" long blade is perfect for cutting open cell foam in 16" on center applications. The blade is manufactured of hardened steel for extended use and comes with (2) holes on one end that are easily lined up in the custom coupler for quick change out. Use with FZ-100 and FZ-200
foam saw replacement blade
Close

30″ Replacement Blades for Closed Cell Foam

$66.50
The FZ-BLADE-2LB is for use in the FOAMZALL Foam Saw to cut 2 pound foam. The blade is manufactured of hardened steel for extended use and comes with (2) holes on one end that are easily lined up in the custom coupler for quick change out. Use with FZ-100 and FZ-200
Replacement Blades for Open Cell Foam
Close

36″ Replacement Blades for Open Cell Foam

$22.95
The FZ-BLADE is a 36" long serrated blade for use in the FOAMZALL foam saw. The blade is manufactured from hardened steel for extended use and comes with (2) holes on one end that are easily lined up in the custom coupler for quick change out.
Use with FZ-100 and FZ-200
short foam saw
Close

Foam Knife 11″ blade

$34.43
Spray Foam Removal Tool. "The finest spray foam insulation removal knife in the industry". Our Handles were designed to reduce the risk of hands accidentally sliding forward across the blade, in the event of a sudden stop while cutting with it. They have high impact resistant handles and extremely sharp replaceable serrated edge blades. Our soft foam knives can be sharpened a number of times before needing to be replaced. "SHORTY", with it's 11" cutting edge, is perfect for all those hard to get at spaces in closets and corners. Replacement blades are available for this tool. !!!WARNING!!! "SHORTY" is extremely sharp. You must use caution, wear protective clothing and Good quality heavy duty gloves when handling this tool. Pricing is per quantity of 1 knife.
standard foam saw
Close

Foam Knife 29″ blade

$40.97
"THE FOAM KNIFE" is the finest in the industry. Designed for 1/2 lb spray foam removal. They have been designed with high impact resistant handle specially shaped to reduce the risk of the user's hands accidentally sliding forward across the blade in the event of a sudden stop while cutting with it. The replacement blades have and extremely sharp serrated edge. The blades can be sharpened a number of times before needing to be replaced.
WARNING - The ISO Knives are extremely sharp. The user must use caution; wear protective clothing and good quality heavy duty gloves when handling these tools.
Close

Foam Saw

$180.00$239.00
3,300 Strokes Per Minute; 8 cgm Air Consumption; 1" Stroke Length; continuous120 PSI; 1/4" Inlet
Replacement blades can be purchased under SKU BL-230.
Foam Saw Adapter
Close

Foam Saw Adapter

$60.00
  • Saw adapted to properly hold foam blades
  • Fits Milwaukee Sawzall
CAUTION – DO NOT OVER TIGHTEN TO SAW.  THE ATTACHMENT IS OFTEN OVER TIGHTENED AND BREAKS THE SAW DUE TO USER ERROR.
closed cell foam saw blade
Close

Super Shear 18” Closed Cell Blade

$63.85
open cell foam saw
Close

Super Shear 27” Open Cell Blade

$59.85
foam saw
Close

Super Shear V2 Foam Saw

$675.00
Your dream come true for trimming spray foam!  This saw will cut open and closed cell foam with great efficiency.  The 1 - 1/8 inch stroke allows you to cut at a slower rpm (which reduces vibration) but still get excellent cutting speed. Specifications:
  • 1 - 1/8 inch stroke
  • Absolutely maintenance free
  • Amps: 11
  • Strokes per Minute: 0-2800
  • Weight: 8.5 pounds
  • Variable speed trigger
  • Solid Shaft
  • Offset blade for ease of use and cleaner cuts
  • T-Handle for ultimate comfort and control
  • Blade Mount: 2 Screws
  • Cuts Open Cell or Closed Cell Insulation
  • Trim walls up to 10 feet high without scaffold
Blades: