3M Venture Red Polypropylene Printed Sheathing Tape 2 1/2" x 216' Polypropylene printed sheathing tape. This tape is a biaxially oriented polypropylene (BOPP) tape coated with an aggressive acrylic pressure sensitive adhesive. It has an aggressive adhesive for quick stick and performs well in cold temperatures as well as high heat and humidity conditions. Suggested applications:
- Closure system and vapor seal on interior and exterior sheathing materials
- Seam Tape on extruded foam products
- Applies to all major house wraps
A 4.0 mil (100 microns), strong and conformable red polyethylene film tape coated with a specially formulated, high tack, removable acrylic non-curing adhesive system. This product has excellent ultraviolet resistance and resistance to moisture, acids, chemicals, alkalis, oils, abrasion, and weathering. SDS
3M All Weather Flashing Tape All Weather Flashing Tape is a self-adhered, waterproof flashing membrane designed for sealing around openings and penetrations in exterior walls. This product has a unique acrylic pressure sensitive adhesive that aggressively sticks and stays stuck both at lower and higher application temperatures than traditional flashing tapes. It even adheres to damp surfaces. The proprietary backing seals around hand driven nails and staples to prevent moisture intrusion. This backing is also tough, resists punctures and tears, yet it is thin to fit conveniently into corners and under the siding. The split paper release liner provides a fast application with an easy and accurate positioning of the tape. Recommended Applications:
- Sealing joints around sills, jambs, and heads of rectangular windows in wood frame construction
- Sealing around other wall interruptions in non-roof areas, such as thresholds, dryer vents, and hose bibs
- When installed properly as a concealed flashing in vertical walls in frame construction, it prevents moisture intrusion and avoids the problems caused by water infiltration
3M Product Number 1520CW Aluminum Foil Tape is a high strength dead soft aluminum foil coated with a cold weather solvent and acrylic pressure sensitive adhesive. It excels in demanding temperature and humidity applications and conforms well to irregular surfaces. Specifically designed for cold weather conditions. Application Ideas: Applies easily to both fibrous and sheet metal ducts. 72mm x 45.7 m 1.8 mil 16/case Contractors: Email Dan at Dan@jrproductsinc.com for contract pricing SDS
3M™ Venture Tape™ White Aluminum Foil Tape Aluminum Foil Tape (1558HT) is coated with a cold weather acrylic pressure sensitive adhesive. Bonds and seals even in cold temperatures, resistant to humidity, moisture, and mold, conforms well to corners and irregular surfaces and is hand tearable. Application Ideas: Lap joint and vapor seal on white foil faced board White 72 mm x 45.7 m 16/case
3M HI-Strength 90 Inverted Spray Adhesive allows up to 10 minutes to make a bond. Allows upside down spray capabilities. Two actuators: one for the standard pattern and one for wide spray pattern. The 90 high strength adhesive is formulated for strength and quick set up. High-temperature resistance. Sprays right where you want it, no misting. Strong bonding for insulation and foam. 16.6 oz. cans. SDS
Alum-a-Grip is designed for sealing hip and ridge area on roof applications. It’s excellent for general flashing applications. Aluma-Grip has an aggressive grip, stays flexible during application, assuring immediate sealing on contact, and superior long-term adhesion. Providing leak proof results, this butyl adhesive/sealant is asphalt and solvent free and offers easy, fast application. Thickness: 30 Mils Tensile Strength: 445 psi average Adhesive: THE GRAY MATTER™ Elastomeric Modified Butyl Rubber SDS
UV resistant masking tape, painters grade, solvent based rubber ADH clean removal, up to 14 days outdoor exposure, blue crepe paper, 5.2 mil thick. 2" x 60 yds.
24 rolls per case.
DESCRIPTION BOSS® 635 Contact/Spray Adhesive combines a uniform misting spray pattern with super high solids to create a fast tacking and high bond strength product capable of handling virtually any light or heavy duty job. 12 oz can. USES Applications for BOSS® 635 Contact/Spray Adhesive can be found throughout the general industry for bonding fabric, plastics, felt, cork, foam, insulation, paper, corrugated, wood, most metals and more. Even with the super high solids, this product has a conveniently long open time to allow for repositioning and adjustment when affixing surfaces to be bonded. Also featured is a moderate flow rate spray valve to provide overspray control in a mist adhesive. The product has an economical coverage rate and is ideally suited for both temporary or permanent bonds. The one product that is truly all-purpose.
- Wide Gap Closed-Cell Vinyl Foam Tape
- Waterproof and weather-resistant.
- Self-adhesive, just peel and press.
- Light gray in color
- Wide Gap Closed-Cell Vinyl Foam Tape
- Waterproof and weather-resistant
- Self-adhesive just peel and press
- Measures 3/8" wide, 3/16" thick(height), 17' long
- White color