insulation free shipping

Showing all 8 results

Show sidebar

ULTRA-FLEX 1000 Waterborne Acrylic Elastomer

Call for Pricing

ULTRA-FLEX 1000 is a high-solids, heat-resistant, single-component water-borne acrylic elastomeric coating. ULTRA-FLEX 1000 is formulated to have excellent adhesion to polyurethane foam as well as other properly prepared construction surfaces.

ULTRA-FLEX 1000 features include:

  • Ease of application
  • Outstanding UV resistance
  • Excellent low-temperature flexibility
  • Non-flammable; water clean-up
  • Excellent dirt pickup resistance
  • Excellent fungus & mildew growth resistant

COLORS

Standard colors are Dark Gray, Light Gray, and White. Other colors are available on special order.

COVERAGE

ULTRA-FLEX 1000 has a theoretical dry film thickness of 8.6 mils when applied at 1 gallon per 100 square feet.

STORAGE STABILITY

ULTRA-FLEX 1000 has a minimum shelf life of one year when stored at temperatures between 40oF and 80oF. Caution should be exercised to prevent material from freezing.

THINNER

ULTRA-FLEX 1000 should be applied directly from the container without thinning.

PRIMER

Sprayed Foams: No primer necessary. Consult manufacturer for application to other surfaces.

ULTRA-GUARD 5700 High Solids Elastomeric Silicone

Call for Pricing

ULTRA-GUARD 5700 is a single-component silicone elastomer specifically designed to protect construction surfaces from the effects of weather and moisture. The outstanding features of ULTRA-GUARD 5700 are its high solids content, rapid cure and superior physical properties. ULTRA-GUARD 5700 is designed as a two-coat system consisting of a basecoat with a contrasting colored topcoat.

USES

ULTRA-GUARD 5700 is designed to provide a durable elastomeric protective coating for sprayed polyurethane foam insulation. ULTRA-GUARD 5700 can be used by itself as the complete protective coating membrane. With the addition of ceramic roofing granules embedded into the coating surface, superior abrasion resistance is achieved.

ADVANTAGES

ULTRA-GUARD 5700’s dry time may be shortened with the addition of an accelerator package. ULTRA-GUARD 5700 exhibits excellent adhesion to sprayed-in-place polyurethane foam as well as other construction surfaces. ULTRA-GUARD 5700 retains its flexibility and membrane integrity from -80F to +250F.

WEATHERING AND RESISTANCE PROPERTIES

ULTRA-GUARD 5700 has excellent appearance and good flexibility with no checking, cracking or significant discoloration after 8,000

hours Accelerated Weathering exposure in an Atlas carbon arc weatherometer according to ASTM D-822. ULTRA-GUARD 5700 has excellent heat resistance to 250F, good salt, acid and solvent resistance, and fair alkali resistance.

ULTRA-GUARD 5700 Silicone Mastic

Call for Pricing
Cool Roof Rating Council certified Single-component silicone elastomer specifically designed to protect construction surfaces from the effects of weather and moisture Low VOC, High solids content, rapid cure and superior physical properties. Designed as a two-coat system consisting of a base coat with a contrasting colored top coat Dry time can be shortened with the addition of an accelerator package
ULTRA-GUARD 5700 Silicone Mastic is a high-solids, heat resistant, single-component, brush/trowell grade silicone mastic with: Exceptional adhesion Outstanding UV resistance Excellent low temperature flexibility & Elasticity High tensile strength

COVERAGE

ULTRA-GUARD 5700 Silicone Mastic approximate coverage is 25 square feet per gallon.

STORAGE STABILITY

ULTRA-GUARD 5700 Silicone Mastic has a minimum shelf life of one year when stored at temperatures between 32o F and 100o F.

APPLICATION INSTRUCTIONS

ULTRA-GUARD 5700 Silicone Mastic is applied by brush or trowell at thicknesses up to 1/4″.

THINNER

ULTRA-GUARD 5700 Silicone Mastic should be applied directly from the container without thinning.

PRIMER

Sprayed Foams: No primer necessary. Consult manufacturer for application to other surfaces.

ULTRA-THANE 230 2.5 Roofing Foam

Call for Pricing

The Ultra-Thane Foam System is used as a nonstructural thermal insulating material for Class A or Class B roof coverings, and roofing recovers over existing classified roof systems. Roof coverings with an A or B classification, as noted in Table 1, are permitted on buildings of any type of construction.

The Ultra-Thane Foam System consists of the Ultra-Thane 230 Roofing Foam, a spray-applied polyurethane foam plastic, covered with Ultra-Flex 1000 or Ultra-Guard 5700, liquid applied, elastomeric coatings.

The Ultra-Thane 230 Roofing Foam consists of two components, “A” (isocyanate) and “B” (polyol resin), which are intended to be interacted in a one to one ratio, by volume, and spray-applied to form a closed cell rigid foam plastic roof covering/insulation material with a nominal density of 3 pounds per cubic foot. The A and B components are available in 55 gallon drums and have a shelf life of 6 months when stored at temperatures between 50°F and 80°F. Further information may be found at www.generalcoatings.net.

ULTRA-THANE 230 2.7 Roofing Foam

Call for Pricing
ULTRA-THANE 230 2.7 Roofing Foam is a two-component spray-in-place rigid monolithic polyurethane foam insulation. This product can be formulated in a variety of densities to accommodate a broad range of applications. ULTRA-THANE 230 contains no ozone-depleting chemicals.

USES

ULTRA-THANE 230 2.7 is used extensively as a superior thermal insulation and waterproofing product for new and remedial roofing.

COLD STORAGE

ULTRA-THANE 230 2.7 is the insulation of choice for maintaining the rigid climatic conditions of many cold storage buildings.

TANK INSULATION

ULTRA-THANE 230 2.7 is an excellent insulation for hot and cold storage vessels.

ULTRA-THANE 230 3 Roofing Foam

Call for Pricing
ULTRA-THANE 230 3 Roofing Foam is a two component spray-in-place rigid monolithic polyurethane foam insulation. This product can be formulated in a variety of densities to accommodate a broad range of applications. ULTRA-THANE 230 contains no ozone-depleting chemicals.

USES

ULTRA-THANE 230 3 is used extensively as a superior thermal insulation and waterproofing product for new and remedial roofing.

COLD STORAGE

ULTRA-THANE 230 3 is the insulation of choice for maintaining the rigid climatic conditions of many cold storage buildings.

TANK INSULATION

ULTRA-THANE 230 3 is an excellent insulation for hot and cold storage vessels.

ULTRA-THANE 230 Roofing Foam

Call for Pricing

The Ultra-Thane Foam System is used as a nonstructural thermal insulating material for Class A or Class B roof coverings, and roofing recovers over existing classified roof systems. Roof coverings with an A or B classification, as noted in Table 1, are permitted on buildings of any type of construction.

The Ultra-Thane Foam System consists of the Ultra-Thane 230 Roofing Foam, a spray-applied polyurethane foam plastic, covered with Ultra-Flex 1000 or Ultra-Guard 5700, liquid applied, elastomeric coatings.

The Ultra-Thane 230 Roofing Foam consists of two components, “A” (isocyanate) and “B” (polyol resin), which are intended to be interacted in a one to one ratio, by volume, and spray-applied to form a closed cell rigid foam plastic roof covering/insulation material with a nominal density of 3 pounds per cubic foot. The A and B components are available in 55 gallon drums and have a shelf life of 6 months when stored at temperatures between 50°F and 80°F. Further information may be found at www.generalcoatings.net.

ULTRA-THANE Coated Foam Plastic Roof Covering System

Call for Pricing

The Ultra-Thane coated foam plastic roof covering system consists of a liquid-applied coating (Ultra-Flex 1000) over a spray-applied polyurethane foam plastic insulation (Ultra-Thane 230).

General Coatings Ultra-Thane 230 Roofing Foam is a two component, spray-applied, polyurethane foam plastic insulation produced in a nominal density of 3.0 pcf (48.0 kg/m3). The foam plastic ingredients (Component A and Component B) are available in 55-gallon (208 L) drums and have a shelf life of nine months for Component A and six months for Component B when stored in unopened containers at temperatures between 50°F and 80°F (10°C and 26.7°C).

The foam plastic insulation has a flame-spread rating of 75 or less when tested in accordance with ASTM E84 or UL 723 at a maximum thickness of 2.0 inches (51 mm).

General Coatings Ultra-Flex 1000 coating is a single-component, liquid-applied, 100 percent acrylic elastomeric coating complying with ASTM D6083. It is supplied in 5-gallon (18.9 L) pails, 55-gallon (209 L) drums and 275-gallon (1041 L) totes; and has a shelf life of 12 months when stored in unopened containers at temperatures between 50°F and 80°F (10°C and 26.7°C).