insulation free shipping

Showing 1–12 of 40 results

10lb & 16lb Hose Assembly

$43.00
For use with Handi-Foam systems. SDS

16lb Polyurethane Foam Kit

$209.07$218.03
UL Classified polyurethane foam kits that meet ASTM E-84 Flame Spread requirements. Cylinder foams are dispensed with a dispensing wand or professional dispensing unit.
  • 1/4" bead size: 31,347 ft.
  • 3/8" bead size: 13,914 ft.
  • 1/2" bead size: 7,827 ft.
Tack-free time is approximately 10 minutes 1" bead fully cures at room conditions in 12-24 hours, cuttable in 1 hour. Wear protective glasses or goggles, nitrile gloves, and protective clothing. Use in a well ventilated area. This product is for PROFESSIONAL USE ONLY. Due to hazardous fees, this item may ship via semi. SDS
Select options

Boss 334 Window and Door Gun Foam – 24oz

$10.60$127.20
Formulated with CFC free propellant. A one component, self expanding, ready to use polyurethane foam, with a plastic adaptor head for use with a foam applicator gun which contains propellants which are completely harmless to the ozone layer.
  • Filling of cavities
  • Creation of a soundproof screen
  • Installing of window and door frames
  • Sealing of all openings in roof construction
  • Mounting and sealing of window and door frames
  • Connecting of insulation materials and roof construction
  • Application of a soundproofing layer on motors
  • Improving thermical isolation in cooling systems
  • AAMA 812-04 Approved
SDS TDS
Select options

Boss 335 Foam Cleaner – 12oz

$7.20$86.40
Specially developed to clean the PU foam applicator guns. A correct cleaning of the gun and the proper use of the product will ensure an optimal function and prevent blockage of the applicator gun. Also suited for the cleaning of the valve and spray nozzle of PU foam canisters and removing uncured PU foam. SDS
Select options

Boss 336 Extreme Weather Gun Foam – 24oz

$10.70$128.40
Top of the line, one component, moisture curing polyurethane foam developed especially to perform under difficult freezing temperature conditions where traditional PU foams fail to extrude and cure.
  • Minimal Expansion Gun Foam
  • Does Not Bend Window Frames
  • Extreme High Yield
  • Moisture Cure, One Component
  • Excellent adhesion on most building materials
  • No shrinkage
  • Exceptional thermal insulation
  • Great acoustical insulation
  • CFC-free propellants - harmless to Ozone layer
  • Can be applied at Frost temperatures
  • Excellent mounting capabilities
SDS TDS
Select options

Boss 812 Fireblock Gun Foam – 24oz

$10.60$127.20
A ready to use foam designed to prevent the spread of smoke and toxic gases from one compartment to another, thereby slowing down the spread of fire. Can be used to seal around copper, PVC and wastewater pipes, as well as conduit and duct work.
  • 360° dispensing
  • Installs in seconds, potentially reducing labor costs by up to 90%
  • Ideal for single and two family homes
  • Paintable (after inspection
SDS TDS
Select options

Bottom Load Foam Gun

$80.53
Spray gun designed for the application of single component polyurethane foam, packaged in pressurized cans and cylinders. The gun enables the user to adjust the product flow, thereby reducing waste. This gun easily converts to attach the cylinder hose to the top of the opening of the gun. Exchange the ball valve for the supplied universal basket to spray from foam canisters. Can be used with our 10# and 16# cylinder foam kits or any of our can gun foams. Easy to clean, nickel plated brass body. Stainless steel needle.  Basket must be attached to the top of the spray gun for can foam use. Barrel length: 6" Total length of gun: 12"

DC-315 Thermal Barrier Coating

$370.00$11,340.00

The International Building Code mandates that polyurethane spray foam be separated from the interior of the building by a 15-minute thermal barrier or other approved covering. DC315 passed certified NFPA 286 and UL 1715 by ETL over a variety of open and closed cell spray-applied urethane foams. It complies with all the requirements of 2006 IBC Section 803.2.1; 2009 IBC Section 803.1.2 and Section 2603.9; 2012 IBC Section 803.1.2 and Section 2603.10 "Special Approvals for Thermal Barriers over Foam Plastics". DC315 also meets the requirement as an Ignition Barrier per AC 377, Appendix X at an incredible spread rate of 400 sq. ft. per gallon.

Characteristics
  • Finish: Flat
  • V.O.C.: (47 g/l)
  • Volume Solids: 67%
  • Drying Time: 77F & 50% RH To touch 1-2 hours to recoat 2 to 4 hours
  • Type of Cure: Coalescence
  • Flash Point: None
  • Reducer/Cleaner: Water
  • Shelf Life: 1 year (unopened)
  • Packaging: 5  gallon pail
  • Shipping weight: 5 gallon pail - 58 lbs
  • Application: Brush, roller, conventional and airless spray
SDS    TDS
Select options

Dow 2-Part Froth Pack

Two-part foam kit that is used to fill and insulate large voids or surfaces. Comes complete with gun, hoses and eight tips. Covers 210 Board Feet. Proper use of a respirator and protective clothing is recommended for application of this product. Due to hazardous fees, this item may ship via semi. SDS PART 1 SDS PART 2
Select options

Dow Foam Kit Cone Nozzle

$44.03
These Dow cone nozzles are for cone-type dispersion of two-component foam.
Select options

Dow Foam Kit Fan Nozzle

$44.03
These Dow fan nozzles are for fan-type dispersion of two-component foam.
Select options

Dow Froth Pak 650, Spray Foam Insulation Kit, Class A fire rated 650 sq ft

A two-part foam kit that is used to fill and insulate large voids or surfaces. Comes complete with gun, hoses and eight tips.
  • Fills cavities, cracks and expansion joints for insulation & air sealing
  • Stops energy loss by providing R-6.5 rating per 1 inch of thickness
  • Can be used to insulate stud wall cavities up to 2" thick
  • Kit yields up to 650 Board Feet of Foam, 1.75 foam density
  • Dow- A Brand you can trust with More Board Feet per kit than the competition
Proper use of a respirator and protective clothing is recommended for application of this product. Due to hazardous fees, this item may ship via semi. SDS PART A SDS PART B
Select options