Foam Seal Tape for AC 1 1/4″ x 1 1/4″ x 42″
Fills the gap between window and air conditioner. 1 1/4" x 1 1/4" x 42". Dark gray in color TECH SHEET (PDF)
Gallon Anchor Adhesive
Anchor adhesive is a high strength, heavy-bodied adhesive, specifically formulated for adhering anchors for hanging insulation. Anchor adhesive bonds metal and nylon anchors to metal, concrete or masonry surfaces. Can also be used to install metal or ceramic wall fixtures in tile applications. Anchor adhesive is also recommended for use as a general-purpose construction adhesive in applications requiring a high strength bond, or in applications subjected to high temperatures. Apply at room temperature and allow one day to dry before hanging insulation. One gallon adhesive used for 750-1000 anchors. SDS
1 lb Can graphite powder reduces static electricity and friction. One or two cans should be blended with cellulose occasionally and run through blower and hose. Lubrication increases efficiency and flow. (12 cans per case). SDS
Heavy Duty Fixed Blade Knife
Wraptor house wrap is a breathable cross-woven polyethylene wrap that helps prevent wall sheathing from soaking up moisture that gets behind the exterior cladding(vinyl siding, brick, etc.) Wraptor provides the tear resistance of a premium wrap at an economical price.
For use behind vinyl siding, brick, and fiber cement board.
Due to size, this item must be shipped via semi. Signature required at time of delivery. Due to expense, call for freight estimate. SDS
HUSKY 16 ft. x 100 ft. Clear 4 mil Plastic Sheeting
The 16 ft. x 100 ft. plastic sheeting is a general-purpose plastic film for use in a variety of construction and DIY projects. Commonly used as a vapor barrier in between insulation and drywall. Can also be used as a drop cloth or a temporary cover for equipment and supplies.
- Made of polyethylene
- 4 mil thickness
- Clear (natural) color
- Heavy-duty coverall
- Can be used for winterizing windows, as a paint drop cloth and as a cover for outdoor protection
- Covers up to 1,600 sq. ft.
Hyde Tools Square Point Knife/Batt Knife
These square batt knives are made of 16 gauge steel. Excellent for cutting thick batts and rockwool. Sheaths for both 6" and 8" sold separately (UH-600, UH-800). Accu Sharp blade sharpener is great for these or any other knives. (KS-100)
This product is a perfect replacement for old plywood attic doors. It is constructed of a 5" foam block and drywall on both sides.
Insul-Hold (100 Ft Roll)
Insul-Hold holds rigid or batt insulation. The unique design simplifies installation, doubles as reinforcement strapping and meets federal specifications. Insulation is impaled on the 2-1/2" arrow prongs which are on 8" centers. Use with either 16" or 24" on center. Product is .025" to .028" thick and 1" wide. It is cold-rolled and hot-dipped galvanized with a dry finish.
- Unique design simplifies installation, doubles as reinforcement strapping and meets federal specifications
- Insulation is impaled on the 2-1/2" arrow prongs which are on 8" centers
- Use with either 16" or 24" on-center applications
Insul-Shield Recessed Light Covers
Insul-Shield is your best protection against fire caused by heat build-up from insulation over or too close to non-IC-rated recessed lights or other heat-producing fixtures. Insul-Shield is made of a lightweight aluminum material. Each 14" x 24" roll makes about six to eight shields. Insul-Shield is quick and easy to install and is safe for use with cellulose, fiberglass, and rock wool insulation.
- Each 14" x 24' roll makes about six to eight shields
- Installation is quick and easy
- Safe for use with cellulose, fiberglass and rock wool insulation