Additional information
| Length | 9', 15' |
|---|
Back to products
Next product 
24 oz Handi-Seal Window & Door Gun Foam $8.99 – $2,989.44
Bottom Load Foam Gun
$74.95
Spray gun designed for the application of single component polyurethane foam, packaged in pressurized cans and cylinders. The gun enables the user to adjust the product flow, thereby reducing waste. This gun easily converts to attach the cylinder hose to the top of the opening of the gun. Exchange the ball valve for the supplied universal basket to spray from foam canisters. Can be used with our 10# and 16# cylinder foam kits or any of our can gun foams. Easy to clean, nickel plated brass body. Stainless steel needle. Basket must be attached to the top of the spray gun for can foam use.
Barrel length: 6″
Total length of gun: 12″
J&R Products offers FREE SHIPPING for all domestic orders that total over $50 and are shipping to the lower 48 states. If you are needing items shipped outside of this area, please give us a call at 1-800-343-4446 to complete your order.
Additional information
Related products
Close
Dow Great Stuff Gaps & Cracks 24 oz
Dow Great Stuff Pro Gaps and Cracks In the United States, GREAT STUFF PRO™ Gaps & Cracks was the first foam to be recognized as a fireblock, which means it resists the free passage of flames to other areas of the building through concealed spaces. The foam is a bright orange color, easily identifiable by U.S. code officials. Considering the combined open space created by gaps, cracks and penetrations in the average home can total as much as a 4' x 4' window left wide open, it’s no wonder that air infiltration is one of the biggest threats to a home’s energy efficiency. And as uncontrolled air movement drives up energy bills, it may also increase the potential for mold, mildew and other moisture-related problems. Great on Benefits For a professional seal, rely on GREAT STUFF PRO™ Gaps & Cracks.
- Ideal for gaps and penetrations up to 3" (75 mm)
- Expands to form airtight and water-resistant seal
- Bonds to wood, metal, masonry, glass and most plastics
- Repels and deflects water
- Quick cure time (tack-free in less than 20 minutes, trim within 30 minutes)*
- Cost-effective: 24 oz (680 g) can equivalent up to 22-quart tubes of caulk; 30 oz (850 g) can up to 33-quart tubes of caulk†
- Orange colored foam
Close
DC-315 Thermal Barrier Coating
The International Building Code mandates that polyurethane spray foam be separated from the interior of the building by a 15-minute thermal barrier or other approved covering. DC315 passed certified NFPA 286 and UL 1715 by ETL over a variety of open and closed cell spray-applied urethane foams. It complies with all the requirements of 2006 IBC Section 803.2.1; 2009 IBC Section 803.1.2 and Section 2603.9; 2012 IBC Section 803.1.2 and Section 2603.10 "Special Approvals for Thermal Barriers over Foam Plastics". DC315 also meets the requirement as an Ignition Barrier per AC 377, Appendix X at an incredible spread rate of 400 sq. ft. per gallon.
Characteristics- Finish: Flat
- V.O.C.: (47 g/l)
- Volume Solids: 67%
- Drying Time: 77F & 50% RH To touch 1-2 hours to recoat 2 to 4 hours
- Type of Cure: Coalescence
- Flash Point: None
- Reducer/Cleaner: Water
- Shelf Life: 1 year (unopened)
- Packaging: 5 gallon pail
- Shipping weight: 5 gallon pail - 58 lbs
- Application: Brush, roller, conventional and airless spray
Close
Soudal Foam Gun Cleaner
Gun & Foam Cleaner is a cleaning aerosol for use on SoudaFoam D&W. It can be used to clean gun applicators and valves or to remove uncured foam.
Sold out
Close
Sys 60 Handi-Foam Refill Low Pressure Spray Polyurethane E-84 Class 1 Foam
Refillable Low Pressure Spray Polyurethane Foam Systems. Proper use of a NIOSH approved half mask respirator with organic vapor cartridges, safety glasses or goggles, nitrile gloves, and protective clothing is recommended for application of this product. The product is for PROFESSIONAL USE ONLY. SDS PART A SDS PART B
