Additional information
| Type |
With Accessories, Without Accessories |
|---|
Krendl 550 Machine Hopper w/ out Bin Level Indicator
Call for Pricing and Availability
16lb Polyurethane Foam Kit
$223.71 – $233.30
UL Classified polyurethane foam kits that meet ASTM E-84 Flame Spread requirements. Cylinder foams are dispensed with a dispensing wand or professional dispensing unit.
- 1/4″ bead size: 31,347 ft.
- 3/8″ bead size: 13,914 ft.
- 1/2″ bead size: 7,827 ft.
Tack-free time is approximately 10 minutes
1″ bead fully cures at room conditions in 12-24 hours, cuttable in 1 hour.
Wear protective glasses or goggles, nitrile gloves, and protective clothing. Use in a well ventilated area. This product is for PROFESSIONAL USE ONLY. Due to hazardous fees, this item may ship via semi.
J&R Products offers FREE SHIPPING for all domestic orders that total over $50 and are shipping to the lower 48 states. If you are needing items shipped outside of this area, please give us a call at 1-800-343-4446 to complete your order.
Additional information
You may also like…
Bottom Load Foam Gun
Spray gun designed for the application of single component polyurethane foam, packaged in pressurized cans and cylinders. The gun enables the user to adjust the product flow, thereby reducing waste. This gun easily converts to attach the cylinder hose to the top of the opening of the gun. Exchange the ball valve for the supplied universal basket to spray from foam canisters. Can be used with our 10# and 16# cylinder foam kits or any of our can gun foams. Easy to clean, nickel plated brass body. Stainless steel needle. Basket must be attached to the top of the spray gun for can foam use.
Barrel length: 6"
Total length of gun: 12"
Tytan Professional Foam Cleaner
For use on any foam insulation applicator gun.
SDS
10lb & 16lb Hose Assembly
For use with Handi-Foam systems.
SDS
Related products
Soudal Cold Weather Gun Foam 24 oz
SoudaFoam Cold Weather is a top of the line, one component, moisture curing PU-Foam developed especially to perform under difficult freezing temperature conditions where traditional PU-Foams fail to extrude and cure. The foam will even cure at ambient temperature of min. -13 F (-25 C) with a can temperature of 41 F (5 C). The foam will extrude AND cure at a temperature of min. 14 F (-10C) 12 cans/case
Boss 336 Extreme Weather Gun Foam – 24oz
Top of the line, one component, moisture curing polyurethane foam developed especially to perform under difficult freezing temperature conditions where traditional PU foams fail to extrude and cure.
- Minimal Expansion Gun Foam
- Does Not Bend Window Frames
- Extreme High Yield
- Moisture Cure, One Component
- Excellent adhesion on most building materials
- No shrinkage
- Exceptional thermal insulation
- Great acoustical insulation
- CFC-free propellants - harmless to Ozone layer
- Can be applied at Frost temperatures
- Excellent mounting capabilities
DC-315 Thermal Barrier Coating
The International Building Code mandates that polyurethane spray foam be separated from the interior of the building by a 15-minute thermal barrier or other approved covering. DC315 passed certified NFPA 286 and UL 1715 by ETL over a variety of open and closed cell spray-applied urethane foams. It complies with all the requirements of 2006 IBC Section 803.2.1; 2009 IBC Section 803.1.2 and Section 2603.9; 2012 IBC Section 803.1.2 and Section 2603.10 "Special Approvals for Thermal Barriers over Foam Plastics". DC315 also meets the requirement as an Ignition Barrier per AC 377, Appendix X at an incredible spread rate of 400 sq. ft. per gallon.
Characteristics- Finish: Flat
- V.O.C.: (47 g/l)
- Volume Solids: 67%
- Drying Time: 77F & 50% RH To touch 1-2 hours to recoat 2 to 4 hours
- Type of Cure: Coalescence
- Flash Point: None
- Reducer/Cleaner: Water
- Shelf Life: 1 year (unopened)
- Packaging: 5 gallon pail
- Shipping weight: 5 gallon pail - 58 lbs
- Application: Brush, roller, conventional and airless spray
Economy Top Load Foam Gun
Spray gun designed for the application of single component polyurethane foam, packaged in pressurized cans. The gun enables the user to adjust the product flow, thereby reducing waste. The gun is hermetically sealed, which prevents hardening of the product in the gun. Professional, metal, reusable gun for the price of a plastic gun.
- Nickel plated body
- Easy to clean, reusable
- Stainless steel needle
- Universal basket
- 2 extensions (200mm) standard
- Barrel length: 6"
- Total length of gun 11"
- Net weight: 450 grams / 1 lb. 2 oz.
- Teflon valve ball
- Packaged in cardboard box
- Individually tested
- Made under ISO 9001 certification