This top load, all-steel gun is durable and performs like more expensive models. The Ultra Gun will give you increased output with a bigger bead. They are Teflon™ coated for easier cleaning. This model is best for upward spraying use.
J&R Products offers FREE SHIPPING for all domestic orders that total over $50 and are shipping to the lower 48 states. If you are needing items shipped outside of this area, please give us a call at 1-800-343-4446 to complete your order.
TYTAN PROFESSIONAL EXTREME CLIMATE PRO is an innovative one-component polyurethane foam specially formulated for use in temperature applications from 14F to 90F. Excellent for filling, insulating and sealing of gaps, cracks, and openings in the interior and exterior of buildings. The groundbreaking formula creates a durable airtight seal and stops cold air infiltration and heat loss. Extreme Climate Pro provides a high insulating value, is economical and saves energy. It has excellent adhesion to most common building materials including wood, glass, metal, masonry, and plastic. It is environmentally friendly with no CFC's, R22 or HCFC's and it is UL classified.
No Bow Technology
Adheres to Frozen Materials
Extreme temperature formula - cures even in freezing weather 14°F (-10°C)
Low pressure, for windows & doors
Designed to cure in low humidity conditions, great for dry climates
Economically insulates, fills, seals, and bonds
Durable weather seal - stops cold air infiltration and heat loss
High insulating value - saves energy and money
Bonds and seals popular materials: wood, concrete, plaster, plumbing, etc.
Shelf life 12 months
Wide range of interior and exterior sealing and insulating applications such as basements, roof areas, plumbing, electrical, heating and cooling penetrations:
excellent to fill and seal all interior and exterior building gaps, cracks, and openings
excellent to fill and seal in exposed corner T-joint and studs
excellent to fill and seal around dryer and exhaust vents, water faucets, plumbing fixtures, electric, HVAC and gas penetrations
excellent to seal and insulate under the edges of exposed siding along foundations
Refillable Low Pressure Spray Polyurethane Foam Systems. Proper use of a NIOSH approved half mask respirator with organic vapor cartridges, safety glasses or goggles, nitrile gloves, and protective clothing is recommended for application of this product. The product is for PROFESSIONAL USE ONLY.
SDS PART ASDS PART B
Spray gun designed for the application of single component polyurethane foam, packaged in pressurized cans and cylinders. The gun enables the user to adjust the product flow, thereby reducing waste. This gun easily converts to attach the cylinder hose to the top of the opening of the gun. Exchange the ball valve for the supplied universal basket to spray from foam canisters. Can be used with our 10# and 16# cylinder foam kits or any of our can gun foams. Easy to clean, nickel plated brass body. Stainless steel needle. Basket must be attached to the top of the spray gun for can foam use.
Barrel length: 6"
Total length of gun: 12"
Handi-Foam two-part low-pressure spray polyurethane foam kit that is used to fill and insulate large voids or surfaces. Handi-Foam® provides excellent insulation by creating a continuous air barrier helping you seal your building's envelope. It is dispensed using the patented Handi-Gun® dispensing unit for accurate and precise applications. Handi-Foam Quick Cure assists in obtaining ENERGY STAR® rating and/or LEED credits. With excellent adhesion properties, Handi-Foam® Quick Cure foam will not let you down.
8 Spray Nozzles
Temperature: Spray foam products are temperature sensitive. You can spray this kit in colder outdoor temperatures, the key is to keep the core temperature of the tanks within the proper range of 75-85°F.
Change Nozzles: It is important to change the nozzle after you stop spraying for more than 30 seconds. Failure to change nozzles may result in damage to the spray gun.
Reuse Nozzles: It is possible to clean and reuse a nozzle 2-3 times. As soon as you are done spraying, remove the nozzle and drop it in a can of acetone. You can also use our Handi-Cleaner to clean out uncured foam.
Application: Use a slow, steady, and smooth motion to spray a continuous layer when applying the foam. Spray what appears to be just under a 1/4" thickness and it will expand and cure to roughly 1 inch. Apply additional layers until desired thickness is achieved, allowing at least 10 minutes between layers.
Clean Up: You can clean up uncured foam with Handi-Cleaner. Once the foam is fully cured, you will have to remove it by mechanical means.
The product is for PROFESSIONAL USE ONLY. Due to hazardous fees, this item may ship via semi.
SDS PART ASDS PART B