Additional information
| Quantity | Individual, Case of 12 |
|---|
Aluminum Drywall Stilts $172.50
TYTAN Professional Air Sealing Gasket Foam $15.08 – $180.96
TYTAN Professional Subfloor High Yield Adhesive Pro 29oz
$16.77 – $201.24
TYTAN PROFESSIONAL Subfloor High Yield Adhesive Pro’s innovative collapsing gel technology foams up after being dispensed and then collapses into a gel to provide the strongest adhesive with the most yield! It is part of the TYTAN Can vs. Case line of High Yield adhesives, meaning it replaces up to 12 conventional 29oz subfloor adhesive cartridges. It fills small gaps and cracks better than conventional adhesives which helps provide a tight seal, level floor, and protects against squeaks. You will be able to cut your installation time in half and use up to 50% less fasteners compared to installing without adhesive. You won’t only save time and money, but the long barrel TYTAN PRO Applicator will also reduce the strain on your back, knees, and hands compared to traditional adhesive applicators. It may even be used on frozen lumber when the air temperature is within the recommended range. It cures at a similar rate compared to traditional adhesives and should be used in conjunction with mechanical fasteners. It provides a strong bond to lumber, treated lumber, OSB, plywood, drywall, paneling, joists, trusses, decking, concrete, metals, masonry, and other typical flooring & wall substrates.
Features:
• Collapsing gel formula – expands to prevent squeaks.
• Conforms to ASTD D-3498 and APA-AFG-01.
• Can be used in temperatures as low as 23°F.
J&R Products offers FREE SHIPPING for all domestic orders that total over $50 and are shipping to the lower 48 states. If you are needing items shipped outside of this area, please give us a call at 1-800-343-4446 to complete your order.
Additional information
You may also like…
Tytan Professional Foam Cleaner
For use on any foam insulation applicator gun. SDS
TYTAN Professional Window and Door PRO Insulating Foam Sealant 24 oz
TYTAN Window & Door Pro is AAMA approved and uses an innovative no-bow technology to create a water and airtight seal. It saves you money by providing superior yield so you can install more windows and doors. It offers superior R-value which reduces energy consumption and contributes to LEED's energy-saving standards. It has premium adhesion abilities to most construction materials including wood, metal, masonry, glass, and most plastics so your windows and doors will stay sealed during construction and climate changes. With TYTAN Window & Door Pro Insulating Foam Sealant you can build with confidence. 18 month shelf life form date of production. SDS
Related products
Bottom Load Foam Gun
Spray gun designed for the application of single component polyurethane foam, packaged in pressurized cans and cylinders. The gun enables the user to adjust the product flow, thereby reducing waste. This gun easily converts to attach the cylinder hose to the top of the opening of the gun. Exchange the ball valve for the supplied universal basket to spray from foam canisters. Can be used with our 10# and 16# cylinder foam kits or any of our can gun foams. Easy to clean, nickel plated brass body. Stainless steel needle. Basket must be attached to the top of the spray gun for can foam use. Barrel length: 6" Total length of gun: 12"
16lb Polyurethane Foam Kit
UL Classified polyurethane foam kits that meet ASTM E-84 Flame Spread requirements. Cylinder foams are dispensed with a dispensing wand or professional dispensing unit.
- 1/4" bead size: 31,347 ft.
- 3/8" bead size: 13,914 ft.
- 1/2" bead size: 7,827 ft.
Sys 27 Handi-Foam Refill Low Pressure Spray Polyurethane E-84 Class 1 Foam
Refillable Low Pressure Spray Polyurethane Foam Systems. Proper use of a NIOSH approved half mask respirator with organic vapor cartridges, safety glasses or goggles, nitrile gloves, and protective clothing is recommended for application of this product. The product is for PROFESSIONAL USE ONLY. SDS PART A SDS PART B
Handi-Foam 605 Bd. Ft. 2-Part Low Pressure Spray Polyurethane Foam Kit with 15′ hose
Handi-Foam two-part low-pressure spray polyurethane foam kit that is used to fill and insulate large voids or surfaces. Handi-Foam® provides excellent insulation by creating a continuous air barrier helping you seal your building's envelope. It is dispensed using the patented Handi-Gun® dispensing unit for accurate and precise applications. Handi-Foam Quick Cure assists in obtaining ENERGY STAR® rating and/or LEED credits. With excellent adhesion properties, Handi-Foam® Quick Cure foam will not let you down. CANNOT BE SOLD IN CA, CO, DE, MA, MD, ME, NJ, NY, VA, VT AND WA Kit Includes:
- Component A
- Component B
- Hoses
- Dispensing Gun
- 8 Spray Nozzles
- 15' hose
- Temperature: Spray foam products are temperature sensitive. You can spray this kit in colder outdoor temperatures, the key is to keep the core temperature of the tanks within the proper range of 75-85°F.
- Change Nozzles: It is important to change the nozzle after you stop spraying for more than 30 seconds. Failure to change nozzles may result in damage to the spray gun.
- Reuse Nozzles: It is possible to clean and reuse a nozzle 2-3 times. As soon as you are done spraying, remove the nozzle and drop it in a can of acetone. You can also use our Handi-Cleaner to clean out uncured foam.
- Safety Considerations: Customers that purchased item also purchased a Tyvek suit with hood, respirator and filters, goggles, and 2 pairs of nitrile gloves.
- Application: Use a slow, steady, and smooth motion to spray a continuous layer when applying the foam. Spray what appears to be just under a 1/4" thickness and it will expand and cure to roughly 1 inch. Apply additional layers until desired thickness is achieved, allowing at least 10 minutes between layers.
- Clean Up: You can clean up uncured foam with Handi-Cleaner. Once the foam is fully cured, you will have to remove it by mechanical means.