Super R Diamond
$98.00
The diamond foil is a two sided reflective with reinforced scrim inside, designed to reflect radiant heat no matter what the season. The plus foil is for new or retrofit house wrap, roofing systems, radiant heat flooring, and OEM’s when a stronger grade is needed. 4′ x 125′ Rolls.
Used mainly for residential.
J&R Products offers FREE SHIPPING for all domestic orders that total over $50 and are shipping to the lower 48 states. If you are needing items shipped outside of this area, please give us a call at 1-800-343-4446 to complete your order.
Related products
150′ Magnum Starter Kit w/ Fan Nozzles
Handi-Foam Accessories
Super R Plus
The diamond foil is a two sided reflective with reinforced scrim inside, designed to reflect radiant heat no matter what the season. The plus foil is for new or retrofit house wrap, roofing systems, radiant heat flooring, and OEM's when a stronger grade is needed. 4' x 125' Rolls. Thicker than the Super R Diamond, and used mainly for Commercial. Perforated. SDS
Energy Guardian Pull Down Cover-Standard
The Energy Guardian Kits for Pull Down Ladders R-38
This is the UPS Friendly Version of EG-113 and comes in two boxes. The lid is in two pieces and the frame is in six pieces. The outside dimensions are 61 x 33 x 17.75 and the inside dimensions are 55 x 27 x 10. The Energy Guardian Kits- Named BEST AVAILABLE PRODUCT by Fine Homebuilding Magazine and A Green Product that You Should Know About in This Old House.com! It's the choice of the most respected home performance experts and the fastest growing solution for homeowners across the country. They are made in the USA by a Veteran Owned Company. Pull down ladders and push up hatches cost money and create uncomfortable areas in any home in both hot and cold weather. The patented design of The Energy Guardian Kits meets all Code and Department of Energy minimum requirements* for your pull down ladder or push up hatch. Important The U.S. Department of Energy published minimum requirements for all pull down ladder covers and push up hatches. *See: http //sws.nrel.gov/sites/default/files/sws_singlefamily_0.pdf, page 74. Use this checklist to compare any alternative:| Essential Features | The Energy Guardian |
| Made of non-compressible, rigid insulation* (no batt insulation) | YES |
| Durable Protective barrier around the attic entrance* | YES |
| A 20-year service life for the product* | YES |
| Insulating value equal to the rest of the attic* | YES |
| Provide a Durable air seal* | YES |
| Can install with uneven or no decking | YES |
DO IT ONCE, DO IT RIGHT with THE ENERGY GUARDIAN KITS
Tenmat Recessed Light Cover
The Tenmat FF130E Recessed Light Cover is made out of a fire safe material and was specifically designed to protect your light fixture from insulation in the attic and to stop unwanted air leakage through your recessed light. The FF130E has been fire and thermally tested in accordance with UL1598 and IEC 60598-1 and can be used with IC, as well as Non-IC rated recessed lights (See installation instructions for maximum lamp wattage and types). Most recessed lights are not compatible with insulation and oftentimes start cycling on/off after they have been buried with cellulose, foam, fiberglass, etc. The lights' malfunction is a concern and a safety hazard. Pushing the insulation away is not an effective solution since it creates air passages in the building envelope and wastes energy. According to the department of energy, recessed lights account for 50% of the total thermal losses of a ceiling. Tenmat, the leading manufacturer of high-temperature engineering materials and fire protection components for recessed lights specifically developed the FF130E Recessed Light Cover to solve this problem and protect lights from insulation while simultaneously allowing the insulation to be continuous and uninterrupted over the whole area of the ceiling. Due to this improved air tightness and insulation, Tenmat users experience significant energy savings, noise reduction, and draft reduction. The FF130E covers are fit within seconds and do not require any assembly or special tools.
- Thermally tested according to UL 1598 for usage with IC and non-IC rated lights
- Fire tested in accordance with IEC 60598-1
- Saves energy by eliminating draft through your recessed light fixture
- Keeps flammable insulation at a safe distance from hot recessed lights
- Easy to fit - no assembly required