Showing 85–96 of 765 results

Show sidebar
handi foam
Close

22 Bd Ft 2-Part Low Pressure Spray Polyurethane Foam Handi Foam

$61.25
A two-part low pressure spray polyurethane foam kit that is used to fill and insulate large voids or surfaces. Comes complete with dispensing wand and two tips. Proper use of a NIOSH approved half mask respirator with organic vapor cartridges, safety glasses or goggles, nitrile goves, and protective clothing is recommended for application of this product. The product is for PROFESSIONAL USE ONLY. SDS PART A SDS PART B
dura-stilt forward leg assembly
Close

23″ Forward Leg Assembly

$21.46
Dura-Stilt replacement parts
foam saw replacement blades
Close

23″ Replacement Blade

$59.00
  • 23" Open CellReplacement Blade
  • Used with #SAW-230 Foam Saw
  • Sold individually
*Picture shows two blades, but blades are sold individually
24" Replacement Blades
Close

24″ Replacement Blades for Open Cell Foam

$28.95
The FZBLADE24 is a 24" long serrated blade for use in the FOAMZALL foam saw. This 24" long blade is perfect for cutting open cell foam in 16" on center applications. The blade is manufactured of hardened steel for extended use and comes with (2) holes on one end that are easily lined up in the custom coupler for quick change out. Use with FZ-100 and FZ-200
24" Roller Assembly
Close

24″ Roller Assembly

$234.64
Stud Scrubber Accessories
Close

24″ Roller Belting (2 pc.)

$108.24
Stud Scrubber Accessories
heated hose wrap
Close

25′ Heated Hose Wrap

$207.89
HEATED SPRAY FOAM HOSE SLEEVE STARTER:
  • Outer Material: Heavy Duty Nylon Shell CPAI 84 - 2000 PSI
  • Self Regulating Heat Tape Warming System - 5 Watts Per Foot
  • Polyethylene Closed Cell Flame Retardant Foam Insulated Lining
  • Slides On With Easy Pull String System
  • Nylon Tie Wraps Secure Heat Tape To Foam Hose
  • 6' Heavy Duty Industrial Cord
  • Color: Red
  • 25' Long - Gangeable to 150' With Extension Pieces
  • 120 VAC - 5 Watts Per Foot
Does not include nozzle or foam delivery hose - shown in pics for display and reference only.
Close

25″ R-Sticks – Attic Measuring Rulers – Pack of 100

$23.00
Attic Rulers are designed to measure the insulation depth when using blown-in insulation. Marked in easy to read numbers and indicators, these rulers will ensure accurate depth measurements for all of your blown-in insulation jobs. Staple these R-Value rulers to attic joists to get the correct amount of insulation. This universal (1" increments) ruler used with all types of blown insulation to provide a working gauge for installer and assurance of depth to inspector and owner. Made of cardboard stock 25" long. SOLD IN BUNDLES OF 100
handi foam sealant
Close

29oz Handi-Foam Black Gun Foam

$13.29
UL Classified polyurethane foam sealants that meet ASTM E-84 Flame spread requirements. Gun Foams are applied with a professional dispensing unit. Wear protective glasses or goggles, nitrile gloves, and protective clothing. Use in a well-ventilated area. This product is for PROFESSIONAL USE ONLY. SDS
drywall tools repair
Close

3.5″ Corner Finisher Blade Change Kit

$65.78
For Repair or Maintenance of the TapeTech® 48XTT 3.5" EZ Roll Adjustable Corner Finisher Includes
  • 2 - 3.5" Carbide Blades (480209)
  • 2 - Skids (409011)
  • 12 - 6-32 x 1/8" Set Screws (489013)
  • 2 - Set Screws (059084)
3.5" easyroll adjustable corner finisher dry wall tools
Close

3.5″ EasyRoll® Adjustable Corner Finisher

$418.00
The TapeTech® EasyRoll® Adjustable Corner Finisher is used to perfectly feather both joint compound edges of internal corners in one pass. The Corner Finishers can be used for wall-to-wall internal corners or wall-to-ceiling corners. The “adjustable” feature of this tool refers to the ability to control the amount of spring pressure by engaging or disengaging one set of tension springs on the back of the corner finisher. Corner Finishers, also referred to as Angle Finishers or Angle Heads, are attached to a corner applicator (CA07TT or CA08TT) or the 14TT MudRunner® to quickly and professionally finish internal drywall corners. EasyRoll® Adjustable Corner Finishers have wheels to provide the smoothest action on the wall and are spring loaded to help compensate for slightly imperfect corners. Use with the FHTT Fiberglass Handle or the XHTT Extension Handle – not included.
  • Embeds inside corner tape on walls and ceilings
  • Finishes inside corners of walls and ceilings
  • Wipes down excess mud in internal corners
Features
  • Stainless Steel Frames
  • Patented, positive Ball Retainer
  • EasyRoll Wheels
  • Adjustable Springs
Operations Guide Schematics Guide