Showing 61–72 of 682 results

2.5″ Corner Finisher Blade Kit

$44.00
For maintenance of the 42TT 2.5" Corner Finisher Includes
  • 420009 - 2.5" Carbide Blades (2)
  • 409011 - Skids (2)
  • 489013 - Set Screw (12)
  • 057353 - Hex L-Key .062 (1)
  • 059084 - Set Screw (2)

2.5″ Corner Finisher Maintenance Kit

$23.00
For Maintenance of the 42TT 2.5" Corner Finisher Includes
  • 480021 - Inside Tension Spring (1)
  • 480017F - Center Clip (1)
  • 484014F - Center Clip Assembly (1)
  • 059091 - Screw (1)
  • 059084 - Set Screw (2)

2.5” Corner Finisher

$299.00
The TapeTech® Corner Finisher is used to perfectly feather both joint compound edges of internal corners in one pass. The Corner Finishers can be used for wall-to-wall internal corners or wall-to-ceiling corners. Corner Finishers, also referred to as Angle Finishers, are attached to a corner applicator (CA07TT or CA08TT) or the 14TT MudRunner® to quickly and professionally finish internal drywall corners. TapeTech® Corner Finishers are spring loaded to help compensate for slightly imperfect corners. Use with the FHTT Fiberglass Handle or the XHTT Extension Handle – not included.
  • Wipes down excess mud in internal corners
  • Embeds inside corner tape on walls and ceilings
  • Finishes inside corners of walls and ceilings
Features
  • Stainless Steel Frames
  • Patented, positive Ball Retainer
Operations Guide Schematics Guide

2″ Corner Finisher

$299.00
The TapeTech® Corner Finisher is used to perfectly feather both joint compound edges of internal corners in one pass. The Corner Finishers can be used for wall-to-wall internal corners or wall-to-ceiling corners. Corner Finishers, also referred to as Angle Finishers, are attached to a corner applicator (CA07TT or CA08TT) or the 14TT MudRunner® to quickly and professionally finish internal drywall corners. The 40XTT 2" Corner Finisher is often used with the FHTT or XHTT handle as part of the taping process to embed tape into the corners and remove excess joint compound after the 15TTE Corner Roller. Use with the FHTT Fiberglass Handle or the XHTT Extension Handle – not included.
  • Wipes down excess mud in internal corners
  • Embeds inside corner tape on walls and ceilings
  • Finishes inside corners of walls and ceilings
Features
  • Stainless Steel Frames
  • Patented, positive Ball Retainer
Operations Guide Schematics Guide

2″ Corner Finisher Blade Kit

$44.00
For Repair or Maintenance of the TapeTech® 40TT 2" Corner Finisher Includes
  • 2 - 8-32 x 1/4" Set Screw, 1/2 Dog SST (059084)
  • 12 - 4-40 x 1/8" Set Screw (409013)
  • 1 - .050 Hex L-Key (057352)
  • 2 - Carbide Blades (400009F)
  • 2 - Skids (409011)
  • 1 - Repair Instructions

2″ Imagination Shut Off Nozzle

$109.86
2" shut-off nozzles feature slide gate closing, are lightweight and have an airtight shut-off.
They are a popular choice for retro dense packing.
1" and 1 1/4" tips sold separately under item # SO-100 or SO-125.

2″ RCD Plenum Brush

$6.20

RCD Fin & Plenum Brush

This 18-inch long natural bristle brush with a 2 inch wide angled head and wood handle is perfect for reaching those places that are difficult to reach with regular brushes.

2″ x 1 1/2″ Nozzle Tip/Outlet Fitting

$11.48
2" x 1 1/2" Outlet fitting

20 3/8″ Dura-Stilt III Forward Adjustable Leg

$40.91
Forward Adjustable Leg (Dura-Stilt III 24" - 40") ApproximateLength is 20 3/8"

20 3/8″ Dura-Stilt III Left Rear Adjustable Leg

$43.93
Left Rear Adjustable Leg for the Dura-StiltIII. (24" - 40") Approximate Length - 20 3/8"

20 3/8″ Dura-Stilt III Right Rear Adjustable Leg

$36.71
Right Rear Adjustable Leg for the Dura-StiltIII. (24" - 40") Approximate Length - 20 3/8"

20 3/8″ Dura-Stilt Right Rear Adjustable Leg

$43.93
Right rear adjustable leg (Dura-stilt III 24" - 40") Approximate Length - 20 3/8"