Showing 49–60 of 659 results

16″ Roller Belting (2 pc.)

$94.57
Stud Scrubber Accessories

16lb Polyurethane Foam Kit

$230.00$240.00
UL Classified polyurethane foam kits that meet ASTM E-84 Flame Spread requirements. Cylinder foams are dispensed with a dispensing wand or professional dispensing unit.
  • 1/4" bead size: 31,347 ft.
  • 3/8" bead size: 13,914 ft.
  • 1/2" bead size: 7,827 ft.
Tack-free time is approximately 10 minutes 1" bead fully cures at room conditions in 12-24 hours, cuttable in 1 hour. Wear protective glasses or goggles, nitrile gloves, and protective clothing. Use in a well ventilated area. This product is for PROFESSIONAL USE ONLY. Due to hazardous fees, this item may ship via semi. SDS

17″ Forward Leg Assembly

$32.15
Dura-Stilt replacement parts

17″ Forward Leg Assembly

$16.74
Dura-Stilt replacement parts

17″ Wall Scraper

$43.35
The Wall Scraper offers more flexibility when it comes to removing excess foam from those wall studs and ceiling joists. The Wall Scraper is 17" in length and has a reversible 2 1/2" cutting surface that can be file sharpened many times before needing to be replaced. These are very well designed, with the increased length of the handles and the angle of the blade, you will spend less time climbing on stuff, experience less bending and reaching to scrape foam. **WARNING** YOU MUST USE CAUTION, WEAR PROTECTIVE CLOTHING AND GOOD QUALITY HEAVY DUTY GLOVES WHEN HANDLING THIS TOOL.

18″ Knit Hood – 12 Pack

$24.00
18" knit hood used for protection when foaming. Contains 12 per package

19″ Forward Leg Assembly

$19.84
Dura-Stilt replacement parts

2-9″ Wheels for #425

$161.66
Wheel sets for each of the Krendl machines to make them portable.

2.5″ Corner Finisher Blade Kit

$44.00
For maintenance of the 42TT 2.5" Corner Finisher Includes
  • 420009 - 2.5" Carbide Blades (2)
  • 409011 - Skids (2)
  • 489013 - Set Screw (12)
  • 057353 - Hex L-Key .062 (1)
  • 059084 - Set Screw (2)

2.5″ Corner Finisher Maintenance Kit

$23.00
For Maintenance of the 42TT 2.5" Corner Finisher Includes
  • 480021 - Inside Tension Spring (1)
  • 480017F - Center Clip (1)
  • 484014F - Center Clip Assembly (1)
  • 059091 - Screw (1)
  • 059084 - Set Screw (2)

2.5” Corner Finisher

$299.00
The TapeTech® Corner Finisher is used to perfectly feather both joint compound edges of internal corners in one pass. The Corner Finishers can be used for wall-to-wall internal corners or wall-to-ceiling corners. Corner Finishers, also referred to as Angle Finishers, are attached to a corner applicator (CA07TT or CA08TT) or the 14TT MudRunner® to quickly and professionally finish internal drywall corners. TapeTech® Corner Finishers are spring loaded to help compensate for slightly imperfect corners. Use with the FHTT Fiberglass Handle or the XHTT Extension Handle – not included.
  • Wipes down excess mud in internal corners
  • Embeds inside corner tape on walls and ceilings
  • Finishes inside corners of walls and ceilings
Features
  • Stainless Steel Frames
  • Patented, positive Ball Retainer
Operations Guide Schematics Guide

2″ Corner Finisher

$299.00
The TapeTech® Corner Finisher is used to perfectly feather both joint compound edges of internal corners in one pass. The Corner Finishers can be used for wall-to-wall internal corners or wall-to-ceiling corners. Corner Finishers, also referred to as Angle Finishers, are attached to a corner applicator (CA07TT or CA08TT) or the 14TT MudRunner® to quickly and professionally finish internal drywall corners. The 40XTT 2" Corner Finisher is often used with the FHTT or XHTT handle as part of the taping process to embed tape into the corners and remove excess joint compound after the 15TTE Corner Roller. Use with the FHTT Fiberglass Handle or the XHTT Extension Handle – not included.
  • Wipes down excess mud in internal corners
  • Embeds inside corner tape on walls and ceilings
  • Finishes inside corners of walls and ceilings
Features
  • Stainless Steel Frames
  • Patented, positive Ball Retainer
Operations Guide Schematics Guide