Showing 325–336 of 658 results

Foam & Vinyl Door Weatherstrip (Case of 25)

$594.75$600.50
  • This attractive and durable door weatherstrip is unaffected by cold temperatures.
  • These vinyl clad foam replacement weatherstrips are designed for installation in the kerf slot of a doorstop. The vinyl clad foam compresses against the door to form a weather-tight seal.
  • Easy do-it-yourself installation with screws included. Slotted holes for simple adjustment. Approximately 17' per set.
  • Case quantity: 25

Foam Backer Rod

$144.00$254.02
Before caulking, use J & R Products, Inc. Backer Rods to help fill gaps and openings in pavement cracks, wall joints, foundations, sidewalk, and driveways. The backer rod helps cushion and insulate and helps prevent 3-point bonding.
  • Fills gaps and openings in pavement cracks, wall joints, foundations, sidewalks and driveways
  • Non-absorbent, closed-cell polyethylene pre-caulking material
  • Twist multiple strands together to fill large cracks, gaps
  • Gray finish
SDS

Foam Box Warmer for up to 205 BF foam kits

$753.33
Designed for warming up to 205 BF disposable spray foam kits, hoses, guns,and tools. Keep temperature sensitive materials safe from harsh winter weather and keep construction crews working all season long. This warming box also doubles as a hot box for caulking, glues, paints, and other temperature sensitive materials.
Specs:
Size- 16" x 16" x 16"
Temp - 70-80 degree F
Weight - 13 pounds
Min allowable temp for guaranteed results, -40 degrees
Voltage 120 volts
Power 280 watts
Current 2.33 amps
ETL Certified to UL/CSA Standards

Foam Box Warmer for up to 605 BF foam kits

$728.73
Designed for warming up to 605 BF disposable spray foam cylinder, hoses, guns,and tools. Keep temperature sensitive materials safe from harsh winter weather and keep construction crews working all season long. This warming box also doubles as a hot box for caulking, glues, paints, and other temperature sensitive materials.
Wraps are sold individually.
Note: 2 wraps are needed to warm both cylinders in a 2 part 600+ BF foam kit.
Specs:
Size- 13" x 13" x 23"
Temp - 70-80 degree F
Weight - 10 pounds
Min allowable temp for guaranteed results, -40 degrees
Voltage 120 volts
Power 280 watts, 2.33 amps
ETL Certified to UL/CSA Standards

Foam Knife 11″ blade

$47.58
Spray Foam Removal Tool. "The finest spray foam insulation removal knife in the industry". Our Handles were designed to reduce the risk of hands accidentally sliding forward across the blade, in the event of a sudden stop while cutting with it. They have high impact resistant handles and extremely sharp serrated edge blades. Our soft foam knives can be sharpened a number of times before needing to be replaced. "SHORTY", with it's 11" cutting edge, is perfect for all those hard to get at spaces in closets and corners. !!!WARNING!!! "SHORTY" is extremely sharp. You must use caution, wear protective clothing and Good quality heavy duty gloves when handling this tool. Pricing is per quantity of 1 knife.

Foam Knife 29″ blade

$57.43
"THE FOAM KNIFE" is the finest in the industry. Designed for 1/2 lb spray foam removal. They have been designed with high impact resistant handle specially shaped to reduce the risk of the user's hands accidentally sliding forward across the blade in the event of a sudden stop while cutting with it. The blades can be sharpened a number of times before needing to be replaced.
WARNING - The ISO Knives are extremely sharp. The user must use caution; wear protective clothing and good quality heavy duty gloves when handling these tools.

Foam Saw Adapter

$65.00
  • Saw adapted to properly hold foam blades
  • Fits Corded Milwaukee Sawzall  Model 6536-21 and Model 6519-31 (Will not work with the cordless saws)
CAUTION – DO NOT OVER TIGHTEN TO SAW.  THE ATTACHMENT IS OFTEN OVER TIGHTENED AND BREAKS THE SAW DUE TO USER ERROR.

Foam Seal Tape for AC 1 1/4″ x 1 1/4″ x 42″

$3.49
Fills the gap between window and air conditioner. 1 1/4" x 1 1/4" x 42". Dark gray in color TECH SHEET (PDF)

Foam Suits with Hood & Boots

These lightweight, spun bonded garments are 1.25 oz. material weight. Polypropylene is breathable, which makes it perfect for the workplace where constant dirt and grime are encountered or protecting clothing when foaming.

Foil-Grip Tape

$23.11$69.34
Pressure-sensitive duct joint sealer and general-purpose sealer on a roll. Provides a water-resistant duct wrap vapor barrier. Sealant stays supple and resists releasing.

Foot Plate

$19.33
Dura-Stilt replacement parts

Force/3 Machine

Call for Pricing and Availability
A portable, high-production machine with a large hopper that produces 2520 lbs/hr of cellulose, and 1350 lbs/hr of fiberglass. At half the weight of comparable machines, the Intec Force/3 retains portability while offering high output. Dual blower motors with variable speed control make dense packing simple. Weighs 350 lbs. The Intec Force/3 comes complete with:
  • 1 - 100' dual remote control cord
  • 1 - Variable Speed Blower Pressure Control
  • Pinset Material Slide Gate
Due to size, this item must be shipped via semi. Signature required at time of delivery. Due to expense, call for freight estimate.