Boss 335 Foam Cleaner – 12oz
Specially developed to clean the PU foam applicator guns. A correct cleaning of the gun and the proper use of the product will ensure an optimal function and prevent blockage of the applicator gun. Also suited for the cleaning of the valve and spray nozzle of PU foam canisters and removing uncured PU foam. SDS
Boss 336 Extreme Weather Gun Foam – 24oz
Top of the line, one component, moisture curing polyurethane foam developed especially to perform under difficult freezing temperature conditions where traditional PU foams fail to extrude and cure.
- Minimal Expansion Gun Foam
- Does Not Bend Window Frames
- Extreme High Yield
- Moisture Cure, One Component
- Excellent adhesion on most building materials
- No shrinkage
- Exceptional thermal insulation
- Great acoustical insulation
- CFC-free propellants - harmless to Ozone layer
- Can be applied at Frost temperatures
- Excellent mounting capabilities
Boss 635 Spray Adhesive
DESCRIPTION BOSS® 635C Contact/Spray Adhesive combines a uniform misting spray pattern with super high solids to create a fast tacking and high bond strength product capable of handling virtually any light or heavy duty job. 12 oz can. USES Applications for BOSS® 635C Contact/Spray Adhesive can be found throughout the general industry for bonding fabric, plastics, felt, cork, foam, insulation, paper, corrugated, wood, most metals and more. Even with the super high solids, this product has a conveniently long open time to allow for repositioning and adjustment when affixing surfaces to be bonded. Also featured is a moderate flow rate spray valve to provide overspray control in a mist adhesive. The product has an economical coverage rate and is ideally suited for both temporary or permanent bonds. The one product that is truly all-purpose.
Boss 812 Fireblock Gun Foam – 24oz
A ready to use foam designed to prevent the spread of smoke and toxic gases from one compartment to another, thereby slowing down the spread of fire. Can be used to seal around copper, PVC and wastewater pipes, as well as conduit and duct work.
- 360° dispensing
- Installs in seconds, potentially reducing labor costs by up to 90%
- Ideal for single and two family homes
- Paintable (after inspection
BOSS® 180 Multi-Seal® White Anchor Adhesive Cartridge
BOSS® 180 Multi-Seal® is a one component, moisture curing adhesive formulated with USP™ Technology for adhering anchor pins to rigid boards, fibrous semi-rigid board, masonry walls, ducts, metal buildings, painted and galvanized surfaces. BOSS® 180 Multi-Seal® has immediate grab and high bond strength allowing insulation to be hung in 24 hours. Check an anchor pin before hanging insulation to be sure it is secure. Cure times vary with humidity. BOSS® 180 Multi-Seal® forms a strong bond even on damp surfaces.
- Use for rigid board and fibrous, semi-rigid board insulation masonry walls, ducts and metal buildings
- Can be used with nylon and metal based pins
- Immediate grab and high bond strength
- Insulation can be hung the next day
- Adheres to painted and galvanized surfaces
- Excellent thermal shock resistance
- Water resistant
- Low odor
- VOC Compliant
- Qualifies for LEED Credits
- Primerless adhesion to damp and non-porous surfaces
BOSS® 357 20 Year Painters Caulk
Designed for both interior and exterior use. Cures to form a flexible, non-yellowing seal without staining or bleeding. Compatible with a wide variety of substrates. Developed for use around windows, door frames, baseboards or any other joint or gap where a weathertight seal is required. Adheres well to wood, masonry, brick and plaster.
- Sealing around window and door frames
- Sealing around baseboards
- Sealing around trim
- Sealing anywhere a weathertight seal is desired
- Sealing corner joints
BOSS® 360 35 Year Sealant Siliconized Latex Caulk
A mildew resistant, paintable, air seal and weatherization sealant formulated to provide long lasting, flexible, weatherproof seals between most common building materials including wood, masonry, concrete, brick, drywall, metal and glass. Its smooth, creamy consistency makes it easy to tool and it cures to a tough flexible seal. Can be used for both interior and exterior applications.
- Sealing around window and door frames
- Sealing around baseboards, trim and corner joints
- Sealing anywhere a weathertight seal is desired
- White, Paintable, soap and water clean up
BOSS® White Latex General Purpose Caulk 10.1 oz
Bostitch 680 Pneumatic Stapler
These are used for applying netting and fabrics. This stapler will take a heavier gauge 1/2" crown staple. Much quicker and will save you time on all jobs over hand tackers. Shoots up to 1700 staples per minute. Lightweight, easy to adjust and the double length magazine provides large load capacity. The BS-680 uses 5/16" (JK-682) staples and 1/2" (JK-683) staples. Schematics (PDF) Staples for this stapler: JK-682 1/2" crown 5/16" leg JK-683 1/2" crown 1/2" leg
Bostitch Auto Fire Construction Stapler (21671B-ALM)
The Stanley Bostitch 21671B-ALM auto fire construction stapler includes a seven-year warranty. This Bostitch tool features two function trigger for single fire and auto fire. Autofire rate can be adjusted from 0 to 1600 staples per minute. A quick loading extended magazine reduces reloading time. The Stanley Bostitch 21671B-ALM is excellent for securing fabric to wood frame, pre-upholstery spring-up operation attaches cardboard, webbing, and Propex to frame, and boat seating with stainless steel staples. The Stanley Bostitch 21671B-ALM uses 1/4" ( JK-671) staples and 5/16" ( JK-672) staples. Schematics (PDF) staples for this stapler: JK-671 3/8" crown 1/4" leg JK-672 3/8" crown 5/16" leg