ULTRA-THANE 230 2.5 Roofing Foam
Call for Pricing
The Ultra-Thane Foam System is used as a nonstructural thermal insulating material for Class A or Class B roof coverings, and roofing recovers over existing classified roof systems. Roof coverings with an A or B classification, as noted in Table 1, are permitted on buildings of any type of construction.
The Ultra-Thane Foam System consists of the Ultra-Thane 230 Roofing Foam, a spray-applied polyurethane foam plastic, covered with Ultra-Flex 1000 or Ultra-Guard 5700, liquid applied, elastomeric coatings.
The Ultra-Thane 230 Roofing Foam consists of two components, “A” (isocyanate) and “B” (polyol resin), which are intended to be interacted in a one to one ratio, by volume, and spray-applied to form a closed cell rigid foam plastic roof covering/insulation material with a nominal density of 3 pounds per cubic foot. The A and B components are available in 55 gallon drums and have a shelf life of 6 months when stored at temperatures between 50°F and 80°F. Further information may be found at www.generalcoatings.net.
This item is not available to purchase online and requires you to give us a call at 1-800-343-4446 so we can give you a shipping estimate.
USESULTRA-THANE 230 3 is used extensively as a superior thermal insulation and waterproofing product for new and remedial roofing.
COLD STORAGEULTRA-THANE 230 3 is the insulation of choice for maintaining the rigid climatic conditions of many cold storage buildings.
TANK INSULATIONULTRA-THANE 230 3 is an excellent insulation for hot and cold storage vessels.
ULTRA-FLEX 1000 is a high-solids, heat-resistant, single-component water-borne acrylic elastomeric coating. ULTRA-FLEX 1000 is formulated to have excellent adhesion to polyurethane foam as well as other properly prepared construction surfaces.
ULTRA-FLEX 1000 features include:
- Ease of application
- Outstanding UV resistance
- Excellent low-temperature flexibility
- Non-flammable; water clean-up
- Excellent dirt pickup resistance
- Excellent fungus & mildew growth resistant
Standard colors are Dark Gray, Light Gray, and White. Other colors are available on special order.
ULTRA-FLEX 1000 has a theoretical dry film thickness of 8.6 mils when applied at 1 gallon per 100 square feet.
ULTRA-FLEX 1000 has a minimum shelf life of one year when stored at temperatures between 40oF and 80oF. Caution should be exercised to prevent material from freezing.
ULTRA-FLEX 1000 should be applied directly from the container without thinning.
Sprayed Foams: No primer necessary. Consult manufacturer for application to other surfaces.
COVERAGEULTRA-GUARD 5700 Silicone Mastic approximate coverage is 25 square feet per gallon.
STORAGE STABILITYULTRA-GUARD 5700 Silicone Mastic has a minimum shelf life of one year when stored at temperatures between 32o F and 100o F.
APPLICATION INSTRUCTIONSULTRA-GUARD 5700 Silicone Mastic is applied by brush or trowell at thicknesses up to 1/4″.
THINNERULTRA-GUARD 5700 Silicone Mastic should be applied directly from the container without thinning.
PRIMERSprayed Foams: No primer necessary. Consult manufacturer for application to other surfaces.
USESClosed-cell spray foam insulation is a higher-density foam than open-cell. The structure of the actual cells are more compact. It is both an air barrier, water-resistive, and vapor barrier. Closed-cell can be installed anywhere in the home.
- Unvented Attics
- Vented Attics
- Unvented Crawl Spaces
- Vented Crawl Spaces
- Concrete Slabs
- Cold Storage Freezers
- Coolers Garages