ULTRA-GUARD 5700 High Solids Elastomeric Silicone
Call for Pricing
ULTRA-GUARD 5700 is a single-component silicone elastomer specifically designed to protect construction surfaces from the effects of weather and moisture. The outstanding features of ULTRA-GUARD 5700 are its high solids content, rapid cure and superior physical properties. ULTRA-GUARD 5700 is designed as a two-coat system consisting of a basecoat with a contrasting colored topcoat.
ULTRA-GUARD 5700 is designed to provide a durable elastomeric protective coating for sprayed polyurethane foam insulation. ULTRA-GUARD 5700 can be used by itself as the complete protective coating membrane. With the addition of ceramic roofing granules embedded into the coating surface, superior abrasion resistance is achieved.
ULTRA-GUARD 5700’s dry time may be shortened with the addition of an accelerator package. ULTRA-GUARD 5700 exhibits excellent adhesion to sprayed-in-place polyurethane foam as well as other construction surfaces. ULTRA-GUARD 5700 retains its flexibility and membrane integrity from -80o F to +250o F.
WEATHERING AND RESISTANCE PROPERTIES
ULTRA-GUARD 5700 has excellent appearance and good flexibility with no checking, cracking or significant discoloration after 8,000
hours Accelerated Weathering exposure in an Atlas carbon arc weatherometer according to ASTM D-822. ULTRA-GUARD 5700 has excellent heat resistance to 250o F, good salt, acid and solvent resistance, and fair alkali resistance.
This item is not available to purchase online and requires you to give us a call at 1-800-343-4446.
ULTRA-FLEX 1000 is a high-solids, heat-resistant, single-component water-borne acrylic elastomeric coating. ULTRA-FLEX 1000 is formulated to have excellent adhesion to polyurethane foam as well as other properly prepared construction surfaces.
ULTRA-FLEX 1000 features include:
- Ease of application
- Outstanding UV resistance
- Excellent low-temperature flexibility
- Non-flammable; water clean-up
- Excellent dirt pickup resistance
- Excellent fungus & mildew growth resistant
Standard colors are Dark Gray, Light Gray, and White. Other colors are available on special order.
ULTRA-FLEX 1000 has a theoretical dry film thickness of 8.6 mils when applied at 1 gallon per 100 square feet.
ULTRA-FLEX 1000 has a minimum shelf life of one year when stored at temperatures between 40oF and 80oF. Caution should be exercised to prevent material from freezing.
ULTRA-FLEX 1000 should be applied directly from the container without thinning.
Sprayed Foams: No primer necessary. Consult manufacturer for application to other surfaces.
USESULTRA-THANE 230 2.7 is used extensively as a superior thermal insulation and waterproofing product for new and remedial roofing.
COLD STORAGEULTRA-THANE 230 2.7 is the insulation of choice for maintaining the rigid climatic conditions of many cold storage buildings.
TANK INSULATIONULTRA-THANE 230 2.7 is an excellent insulation for hot and cold storage vessels.
The Ultra-Thane coated foam plastic roof covering system consists of a liquid-applied coating (Ultra-Flex 1000) over a spray-applied polyurethane foam plastic insulation (Ultra-Thane 230).
General Coatings Ultra-Thane 230 Roofing Foam is a two component, spray-applied, polyurethane foam plastic insulation produced in a nominal density of 3.0 pcf (48.0 kg/m3). The foam plastic ingredients (Component A and Component B) are available in 55-gallon (208 L) drums and have a shelf life of nine months for Component A and six months for Component B when stored in unopened containers at temperatures between 50°F and 80°F (10°C and 26.7°C).
The foam plastic insulation has a flame-spread rating of 75 or less when tested in accordance with ASTM E84 or UL 723 at a maximum thickness of 2.0 inches (51 mm).
General Coatings Ultra-Flex 1000 coating is a single-component, liquid-applied, 100 percent acrylic elastomeric coating complying with ASTM D6083. It is supplied in 5-gallon (18.9 L) pails, 55-gallon (209 L) drums and 275-gallon (1041 L) totes; and has a shelf life of 12 months when stored in unopened containers at temperatures between 50°F and 80°F (10°C and 26.7°C).
USESClosed-cell spray foam insulation is a higher-density foam than open-cell. The structure of the actual cells are more compact. It is both an air barrier, water-resistive, and vapor barrier. Closed-cell can be installed anywhere in the home.
- Unvented Attics
- Vented Attics
- Unvented Crawl Spaces
- Vented Crawl Spaces
- Concrete Slabs
- Cold Storage Freezers
- Coolers Garages