Additional information
| Size |
1", 1 5/8", 2", 2 1/2", 3 1/2", 4 1/2", 5 1/2", 6 1/2", 8 1/2", 9 1/2", 10 1/2", 11 1/2", 12 1/2" |
|---|
Space Standard Anchors
$80.00 – $150.00
Anchors are glued in place and used to support rigid board and batt type insulation on walls, ceilings, and roof application. The anchor is a copper coated 12-gauge steel spindle on a 2″ x 2″ galvanized steel plate. Generally, anchors installed one day and insulation the next. Anchor and glue need to be at room temperature when installed. Space anchors 12″-16″ apart for ceilings and walls.
J&R Products offers FREE SHIPPING for all domestic orders that total over $50 and are shipping to the lower 48 states. If you are needing items shipped outside of this area, please give us a call at 1-800-343-4446 to complete your order.
Additional information
You may also like…
Gallon Anchor Adhesive
Anchor adhesive is a high strength, heavy-bodied adhesive, specifically formulated for adhering anchors for hanging insulation. Anchor adhesive bonds metal and nylon anchors to metal, concrete or masonry surfaces. Can also be used to install metal or ceramic wall fixtures in tile applications. Anchor adhesive is also recommended for use as a general-purpose construction adhesive in applications requiring a high strength bond, or in applications subjected to high temperatures. Apply at room temperature and allow one day to dry before hanging insulation.
One gallon adhesive used for 750-1000 anchors.
SDS
BOSS® 180 Multi-Seal® White Anchor Adhesive Cartridge
BOSS® 180 Multi-Seal® is a one component, moisture curing adhesive formulated with USP™ Technology for adhering anchor pins to rigid boards, fibrous semi-rigid board, masonry walls, ducts, metal buildings, painted and galvanized surfaces. BOSS® 180 Multi-Seal® has immediate grab and high bond strength allowing insulation to be hung in 24 hours. Check an anchor pin before hanging insulation to be sure it is secure. Cure times vary with humidity. BOSS® 180 Multi-Seal® forms a strong bond even on damp surfaces.
- Use for rigid board and fibrous, semi-rigid board insulation masonry walls, ducts and metal buildings
- Can be used with nylon and metal based pins
- Immediate grab and high bond strength
- Insulation can be hung the next day
- Adheres to painted and galvanized surfaces
- Excellent thermal shock resistance
- Water resistant
- Low odor
- VOC Compliant
- Qualifies for LEED Credits
- Primerless adhesion to damp and non-porous surfaces