Additional information
| Quantity |
Individual, Case of 12 |
|---|
Red Devil RD PRO Siliconized Acrylic Caulk 10.1 fl oz
$3.63 – $43.56
Construction Grade – White Siliconized Acrylic Caulk, Interior/Exterior
A durable multi-use caulk for the professional contractor made to perform in some of the toughest applications found during new home construction. Ideal for window/door frames, countertops, baseboards, eaves, siding, thresholds, trim, vents, railings, and joints. Not recommended for marine use. Excellent adhesion to painted and unpainted wood, drywall, masonry, plaster, ceramic, glass, brick, metal, and concrete.
Application Temp: 40 – 90 degrees
Tack Free Time: 30 minutes
Full Cure: 72 hours
Paint-Over Time: 4-6 hours depending on climate conditions
Water clean-up
Meets ASTM C-834-00
J&R Products offers FREE SHIPPING for all domestic orders that total over $50 and are shipping to the lower 48 states. If you are needing items shipped outside of this area, please give us a call at 1-800-343-4446 to complete your order.
Additional information
Related products
Intumescent Latex Firestop Caulk 10.1 fl oz
In the event of a fire, BOSS 814, a one-part, elastomeric, intumescent firestop sealant will expand to form an insulation char that prevents the spread of fire, smoke, and toxic gases through construction openings. It is formulated with non-combustible, inorganic materials. It remains flexible when cured, making it ideal for both horizontal and vertical joints that are subject to vibration or dynamic movement. With its excellent adhesion properties, it is particularly suited for sealing walls and floors that have been penetrated by pipes, conduits, and electrical cables in all types of construction. It can also be used to fill interior voids around HVAC, plumbing, and framing.
This sealant meets or exceeds ASTM E-814(UL 1479) and meets the criteria for fire/smoke/draft stop for BOCA, CABO, UBC, SBCCI, IRC and the 2003 International Building Codes.
The product is easy to apply using a standard caulking gun or trowel and cleans up with water, prior to curing. It can be used for interior or exterior applications and can be painted(after inspection).
SDS
#6 Mastic RCD
RCD Corporation #6 Mastic is a water-borne, low VOC, fiber reinforced, non-flammable, non-toxic, low to high-velocity air duct sealant used to fabricate and repair thermal insulation and all duct types including UL listed air ducts. It seals the seams of crawl space vapor retarder and house wrap; seals the leaks in return air ducts, supply ducts, air handlers, plenums, grilles, registers, dampers, and boots and is used in home sealing to reduce air infiltration into the living area. Easy application by brush, trowel, palm, spray, or extrusion. Earns LEED credits. The color is Cream White. Store at temperatures between 45 F and 90 F. Apply at temperatures between 35 F and 120 F.
Comes in either 1 or 2 gallon pail.
SDS
ASI 600 High Temperature Silicone Sealant Adhesive
ASI 600 High Temperature Silicone Sealant Adhesive is a one-part, moisture curing, RTV (room temperature vulcanizing) silicone that cures to form a tough rubber gasket. ASI 600 was specifically formulated to be used where operating temperatures up to 310°C (600°F) are reached intermittently. ASI 600 will remain permanently flexible and provides excellent resistance to aging, vibration and shock. ASI 600 contains red iron oxide which enables it to be a true high temperature silicone that will continue to be resiliant at extreme temperatures. Due to its properties this makes it ideal for a variety of applications including formed-in-place gasketing and other automotive applications. ASI 600 can also be used on a variety of construction and industrial application where its heat resistance is needed. 10.2 oz. tubes. 24 tubes per case.
SDS