Handi-Foam two-part low-pressure spray polyurethane foam kit that is used to fill and insulate large voids or surfaces. Handi-Foam® provides excellent insulation by creating a continuous air barrier helping you seal your building's envelope. It is dispensed using the patented Handi-Gun® dispensing unit for accurate and precise applications. Handi-Foam Quick Cure assists in obtaining ENERGY STAR® rating and/or LEED credits. With excellent adhesion properties, Handi-Foam® Quick Cure foam will not let you down.
- Component A
- Component B
- Dispensing Gun
- 8 Spray Nozzles
- Temperature: Spray foam products are temperature sensitive. You can spray this kit in colder outdoor temperatures, the key is to keep the core temperature of the tanks within the proper range of 75-85°F.
- Change Nozzles: It is important to change the nozzle after you stop spraying for more than 30 seconds. Failure to change nozzles may result in damage to the spray gun.
- Reuse Nozzles: It is possible to clean and reuse a nozzle 2-3 times. As soon as you are done spraying, remove the nozzle and drop it in a can of acetone. You can also use our Handi-Cleaner to clean out uncured foam.
- Safety Considerations: Customers that purchased item also purchased a Tyvek suit with hood, respirator and filters, goggles, and 2 pairs of nitrile gloves.
- Application: Use a slow, steady, and smooth motion to spray a continuous layer when applying the foam. Spray what appears to be just under a 1/4" thickness and it will expand and cure to roughly 1 inch. Apply additional layers until desired thickness is achieved, allowing at least 10 minutes between layers.
- Clean Up: You can clean up uncured foam with Handi-Cleaner. Once the foam is fully cured, you will have to remove it by mechanical means.
The product is for PROFESSIONAL USE ONLY. Due to hazardous fees, this item may ship via semi.
SDS PART A
SDS PART B