Perfect tool for making sure the moisture level in a sprayed wall is within an acceptable range.
J&R Products offers FREE SHIPPING for all domestic orders that total over $50 and are shipping to the lower 48 states. If you are needing items shipped outside of this area, please give us a call at 1-800-343-4446 to complete your order.
The Tenmat FF130E Recessed Light Cover is made out of a fire safe material and was specifically designed to protect your light fixture from insulation in the attic and to stop unwanted air leakage through your recessed light. The FF130E has been fire and thermally tested in accordance with UL1598 and IEC 60598-1 and can be used with IC, as well as Non-IC rated recessed lights (See installation instructions for maximum lamp wattage and types). Most recessed lights are not compatible with insulation and oftentimes start cycling on/off after they have been buried with cellulose, foam, fiberglass, etc. The lights' malfunction is a concern and a safety hazard. Pushing the insulation away is not an effective solution since it creates air passages in the building envelope and wastes energy. According to the department of energy, recessed lights account for 50% of the total thermal losses of a ceiling. Tenmat, the leading manufacturer of high-temperature engineering materials and fire protection components for recessed lights specifically developed the FF130E Recessed Light Cover to solve this problem and protect lights from insulation while simultaneously allowing the insulation to be continuous and uninterrupted over the whole area of the ceiling. Due to this improved air tightness and insulation, Tenmat users experience significant energy savings, noise reduction, and draft reduction. The FF130E covers are fit within seconds and do not require any assembly or special tools.
Thermally tested according to UL 1598 for usage with IC and non-IC rated lights
Fire tested in accordance with IEC 60598-1
Saves energy by eliminating draft through your recessed light fixture
Keeps flammable insulation at a safe distance from hot recessed lights
Easy to fit - no assembly required
These recessed light covers are flexible and lightweight- approx 2 lbs. SDS
The 100', black Milspec Pro Power SJTW Extension Cord 12 AWG is made of soft-drawn, bunch-stranded copper conductors with large strain reliefs at both ends for enhanced durability. This 100' 3-pin male to female extension cord is manufactured with cold-weather insulating and jacketing compounds.
Vinyl-faced fiberglass blanket for gas, oil, or electric water heaters up to 60 gallon capacity. Each jacket is individually bagged and vacuum packed for efficient storage and comes with a jacket top. SDS