Dura-Stilts III 1/4-20×2″ Flat Head Mach Screw w/Nut (DUR-3)
Dura-Stilts III 1/4-20×2″ Flat Head Mach Screw w/Nut (DUR-3) – Genuine Dura-Stilts Replacement Part – Made in the U.S.A.
J&R Products offers FREE SHIPPING for all domestic orders that total over $50 and are shipping to the lower 48 states. If you are needing items shipped outside of this area, please give us a call at 1-800-343-4446 to complete your order.
850 Mono Beacon Polypropylene Tying Twine. 8,500 feet per tube, 34,000 total feet, each tube comes in it's own carrying box (4 tubes per case). Can be used to secure insulation batts or any general purpose tying applications. 4 ROLLS PER CASESDS
The FF109X is the only two hour UL tested and approved fire barrier that can be used with a wide range of recessed lights to effectively prevent the spread of flames through a ceiling opening. Once a hole is made in the drywall to install recessed lights or speakers, the integrity of the construction and its ability to perform in a fire is reduced significantly, creating a potential fire hazard. This is the reason why the International Building Code states: “Where floor/ceiling assemblies are required to have a 1 or 2-hour fire resistance rating, recessed fixtures shall be installed such that the required fire resistance of the ceiling will not be reduced” The FF109X is two hour approved for every major ceiling assembly including gypsum, sheetrock, drywall, acoustical tiles and suspended ceilings with any joist spacing up to 24 inch on center. The enclosure is made out of an intumescent material which will be activated in case of a fire, stopping both, flame spread and heat transmission for two hours. Tenmat 2 Hour Fire Rated Light Covers are UL tested and approved for use with IC-rated recessed incandescent, fluorescent, LED light fixtures. TENMAT Fire Rated Light Covers can be used with most light manufacturer’s models and are suitable for new construction as well as remodel projects. In addition to its fire protection capabilities, the FF109X also exhibits excellent thermal and acoustical insulating properties to save energy and reduce noise. The flexible and lightweight nature of the covers makes installation quick and easy, reduces the stress put on the ceiling and significantly reduces labor costs compared to standard dry-walled box constructions. Data Sheet (PDF)
Anchor adhesive is a high strength, heavy-bodied adhesive, specifically formulated for adhering anchors for hanging insulation. Anchor adhesive bonds metal and nylon anchors to metal, concrete or masonry surfaces. Can also be used to install metal or ceramic wall fixtures in tile applications. Anchor adhesive is also recommended for use as a general-purpose construction adhesive in applications requiring a high strength bond, or in applications subjected to high temperatures. Apply at room temperature and allow one day to dry before hanging insulation. One gallon adhesive used for 750-1000 anchors. SDS
Super R® Diamond radiant barrier is a low-cost, entry level product designed for the DIYer who wants the least expensive material on the market that still reflects 95 percent of the radiant heat entering or leaving a structure. Super R® Diamond radiant barrier is primarily designed to be laid on the attic floor. Super R® Diamond radiant barrier meets all residential fire and building codes and is perforated so moisture will not be trapped between the material and existing insulation. 4' X 125' .