Additional information
| Length | 9', 15' |
|---|
Dow Froth Pak 650, Spray Foam Insulation Kit, Class A fire rated 650 sq ft
$749.00
A two-part foam kit that is used to fill and insulate large voids or surfaces. Comes complete with gun, hoses and eight tips.
- Fills cavities, cracks and expansion joints for insulation & air sealing
- Stops energy loss by providing R-6.5 rating per 1 inch of thickness
- Can be used to insulate stud wall cavities up to 2″ thick
- Kit yields up to 650 Board Feet of Foam, 1.75 foam density
- Dow- A Brand you can trust with More Board Feet per kit than the competition
Proper use of a respirator and protective clothing is recommended for application of this product. Due to hazardous fees, this item may ship via semi.
J&R Products offers FREE SHIPPING for all domestic orders that total over $50 and are shipping to the lower 48 states. If you are needing items shipped outside of this area, please give us a call at 1-800-343-4446 to complete your order.
Additional information
Related products
Sold out
Close
Sys 27 Handi-Foam Refill Low Pressure Spray Polyurethane E-84 Class 1 Foam
Refillable Low Pressure Spray Polyurethane Foam Systems. Proper use of a NIOSH approved half mask respirator with organic vapor cartridges, safety glasses or goggles, nitrile gloves, and protective clothing is recommended for application of this product. The product is for PROFESSIONAL USE ONLY. SDS PART A SDS PART B
Sold out
Close
Sys 17 Handi-Foam Refill Low Pressure Spray Polyurethane E-84 Class 1 Foam
Refillable Low Pressure Spray Polyurethane Foam Systems. Proper use of a NIOSH approved half mask respirator with organic vapor cartridges, safety glasses or goggles, nitrile gloves, and protective clothing is recommended for application of this product. The product is for PROFESSIONAL USE ONLY. SDS PART A SDS PART B
Sold out
Close
Sys 60 Handi-Foam Refill Low Pressure Spray Polyurethane E-84 Class 1 Foam
Refillable Low Pressure Spray Polyurethane Foam Systems. Proper use of a NIOSH approved half mask respirator with organic vapor cartridges, safety glasses or goggles, nitrile gloves, and protective clothing is recommended for application of this product. The product is for PROFESSIONAL USE ONLY. SDS PART A SDS PART B
Close
Soudal Cold Weather Gun Foam 24 oz
SoudaFoam Cold Weather is a top of the line, one component, moisture curing PU-Foam developed especially to perform under difficult freezing temperature conditions where traditional PU-Foams fail to extrude and cure. The foam will even cure at ambient temperature of min. -13 F (-25 C) with a can temperature of 41 F (5 C). The foam will extrude AND cure at a temperature of min. 14 F (-10C) 12 cans/case
**uses gun--product # FS-274**