Additional information
| Quantity | Individual, Pack of 25 |
|---|
Previous product 
Back to products 
Dow Foam Kit Cone Nozzle $2.95 – $36.40
Dow Foam Kit Fan Nozzle
$2.95 – $36.40
These Dow fan nozzles are for fan-type dispersion of two-component foam.
J&R Products offers FREE SHIPPING for all domestic orders that total over $50 and are shipping to the lower 48 states. If you are needing items shipped outside of this area, please give us a call at 1-800-343-4446 to complete your order.
Additional information
You may also like…
SureCare 6.5 mil Nitrile Industrial Glove
The SureCare are powder-free blue Nitrile gloves. Use these gloves when applying spray foam.
- Increased Tensile Strength 6.5 mil
- Increased Puncture Resistance
- 100% Latex-Free
- Textured Outer Finish
- Superior chemical resistance to a broad range of chemicals
Hooded Disposable Coveralls
These disposable coveralls resist tears or punctures and stay tough wet or dry. Full cut allows coveralls to be worn comfortably over clothing for a variety of jobs. Fabric is a spun-bound fiber. Zip front with a collar. Sold individually or by the case. 25 per case. CL-700, Boots Sold Separately. SDS We Are Currently Out Of Stock Until 2021 For These Items.
North Respirator Half Masks
This North has a soft hypoallergenic silicone rubber face piece. Cradle suspension provides a secure fit without irritation. Low profile allows a wide field of vision and room for protective eyewear.
Related products
DC-315 Thermal Barrier Coating
The International Building Code mandates that polyurethane spray foam be separated from the interior of the building by a 15-minute thermal barrier or other approved covering. DC315 passed certified NFPA 286 and UL 1715 by ETL over a variety of open and closed cell spray-applied urethane foams. It complies with all the requirements of 2006 IBC Section 803.2.1; 2009 IBC Section 803.1.2 and Section 2603.9; 2012 IBC Section 803.1.2 and Section 2603.10 "Special Approvals for Thermal Barriers over Foam Plastics". DC315 also meets the requirement as an Ignition Barrier per AC 377, Appendix X at an incredible spread rate of 400 sq. ft. per gallon.
Characteristics- Finish: Flat
- V.O.C.: (47 g/l)
- Volume Solids: 67%
- Drying Time: 77F & 50% RH To touch 1-2 hours to recoat 2 to 4 hours
- Type of Cure: Coalescence
- Flash Point: None
- Reducer/Cleaner: Water
- Shelf Life: 1 year (unopened)
- Packaging: 5 gallon pail
- Shipping weight: 5 gallon pail - 58 lbs
- Application: Brush, roller, conventional and airless spray
System 17 Handi-Foam Refill Low Pressure Spray Polyurethane 1.75
Refillable Low-Pressure Spray Polyurethane Foam Systems. Proper use of an NIOSH-approved half mask respirator with organic vapor cartridges, safety glasses or goggles, nitrile gloves, and protective clothing is recommended for application of this product. This product is for PROFESSIONAL USE ONLY. SDS PART A SDS PART B
Soudal Foam Gun Cleaner
Gun & Foam Cleaner is a cleaning aerosol for use on SoudaFoam D&W. It can be used to clean gun applicators and valves or to remove uncured foam.
HT770 All Metal Barrel Foam Gun
The HT770 is a premium, all-metal barrel dispensing unit designed for the professional contractor for frequent use. This gun allows for adjustable bead control, is solvent resistant, includes a non-stick teflonized basket and needle valve, and offers available replacement non-stick teflonized basket, increasing the longevity of the dispensing unit. The HT770 has a barrel length of 7 inches (18 cm)
- adjustable bead control with immediate shutoff
- durable construction
- solvent resistant
- non-stick teflon coated basket and needle valve