Additional information
| Quantity |
Individual, Pack of 25 |
|---|
Dow Foam Kit Cone Nozzle
$50.20
These Dow cone nozzles are for cone-type dispersion of two-component foam.
J&R Products offers FREE SHIPPING for all domestic orders that total over $50 and are shipping to the lower 48 states. If you are needing items shipped outside of this area, please give us a call at 1-800-343-4446 to complete your order.
Additional information
You may also like…
Related products
DC-315 Thermal Barrier Coating
The International Building Code mandates that polyurethane spray foam be separated from the interior of the building by a 15-minute thermal barrier or other approved covering. DC315 passed certified NFPA 286 and UL 1715 by ETL over a variety of open and closed cell spray-applied urethane foams. It complies with all the requirements of 2006 IBC Section 803.2.1; 2009 IBC Section 803.1.2 and Section 2603.9; 2012 IBC Section 803.1.2 and Section 2603.10 "Special Approvals for Thermal Barriers over Foam Plastics". DC315 also meets the requirement as an Ignition Barrier per AC 377, Appendix X at an incredible spread rate of 400 sq. ft. per gallon.
Characteristics- Finish: Flat
- V.O.C.: (47 g/l)
- Volume Solids: 67%
- Drying Time: 77F & 50% RH To touch 1-2 hours to recoat 2 to 4 hours
- Type of Cure: Coalescence
- Flash Point: None
- Reducer/Cleaner: Water
- Shelf Life: 1 year (unopened)
- Packaging: 5 gallon pail
- Shipping weight: 5 gallon pail - 58 lbs
- Application: Brush, roller, conventional and airless spray
Dow Great Stuff Pro™ Drywall Gasket Gun Foam 18oz
THE GASKET GURU
A gasket that’s durable and flexible? Just the product you need to form an airtight seal between framing lumber and drywall.
This water-based, one-component sealant foam:
- Improves air sealing by creating a gasket between drywall and frame.
- Is applied to face of top plate, bottom plate and around all rough openings.
- Compresses when cured preventing bowing issues with drywall board. A 1/2" bead can easily be compressed to < 1/16" by the force of screwing on drywall.
- Withstands scrapping and rubbing when drywall is slid up the wall and put in place. Is tolerant of abrasive contact and maintains its seal.
- Helps meet stricter energy codes.
- Does not expand like traditional, one-component, polyurethane foam sealants.
- Air cures in 2 to 24 hours, depending on humidity. Dries fastest at low humidity.
- Creates a more stable indoor temperature, lowering energy bills.
- Reduces moisture, mold, pollutants and allergens that creep through small openings.
- Minimizes waste. Reusable for up to 90 days when left attached to GREAT STUFF PRO™ Dispensing Gun with the blue handle. Shake vigorously for 60 seconds before use.
- Non-cured spills and drips means easy water clean-up
- Low VOC
- Easy gun clean-out with standard garden hose
- U.S. only
- Available in 18-oz. cans
Bottom Load Foam Gun
Spray gun designed for the application of single component polyurethane foam, packaged in pressurized cans and cylinders. The gun enables the user to adjust the product flow, thereby reducing waste. This gun easily converts to attach the cylinder hose to the top of the opening of the gun. Exchange the ball valve for the supplied universal basket to spray from foam canisters. Can be used with our 10# and 16# cylinder foam kits or any of our can gun foams. Easy to clean, nickel plated brass body. Stainless steel needle. Basket must be attached to the top of the spray gun for can foam use.
Barrel length: 6"
Total length of gun: 12"