Closed Cell Vinyl Foam Tape – White
$3.50
- Wide Gap Closed-Cell Vinyl Foam Tape
- Waterproof and weather-resistant
- Self-adhesive just peel and press
- Measures 3/8″ wide, 3/16″ thick(height), 17′ long
- White color
J&R Products offers FREE SHIPPING for all domestic orders that total over $50 and are shipping to the lower 48 states. If you are needing items shipped outside of this area, please give us a call at 1-800-343-4446 to complete your order.
Related products
Tenmat FF109-350 1-hour Fire Rated Light Cover
The FF109-350 1 Hour fire rated light cover is a dome-shaped intumescent cover which has been designed to help maintain the integrity of fire rated ceilings when penetrated by recessed fixtures. The unique design gives the architect, specifier and installer more freedom in fixture selection as the covers are suited to a wide range of recessed fixtures. The flexible and lightweight nature of the fire rated light cover makes installation quick and easy, reduces the stress put on the ceiling and significantly reduces labor costs compared to standard dry-walled box constructions. The high expansion and insulating properties of the cover ensures that both, flame spread and heat transmission, are stopped for 60 minutes. Inside Height 11″ Diameter 15″ Data Sheet (PDF)
Can Cover It – 12x14x14
- Low Profile Series Specifications
- The Low Profile Series is an excellent option for IC-rated can light fixtures.
- External Dimensions: 14" W x 14" W x 12" H
- Internal Dimensions: 13" W x 13" W x 11.5" H
- Packaged Dimensions: 14" W x 2.5" W x 15" H
- Exterior Fire Resistance rating: UL 723/ASTM E84 and CAN/ULC S102. Meets NFPA 90A and 90B - less than 25 Smoke and 50 Flame Spread
- Airflow Temperature Limit: up to 250 F
- Interior Heat Resistance: 475 F to 700 F
- Light Weight: approximately 1.25 lbs per unit
- Material: FSK-Faced Fiber Glass
- Bug, Pest, Water, and Mold Resistant
- Fits typical 6" Can Fixture and up to 7" max. Can Diameter
Gallon Anchor Adhesive
Anchor adhesive is a high strength, heavy-bodied adhesive, specifically formulated for adhering anchors for hanging insulation. Anchor adhesive bonds metal and nylon anchors to metal, concrete or masonry surfaces. Can also be used to install metal or ceramic wall fixtures in tile applications. Anchor adhesive is also recommended for use as a general-purpose construction adhesive in applications requiring a high strength bond, or in applications subjected to high temperatures. Apply at room temperature and allow one day to dry before hanging insulation. One gallon adhesive used for 750-1000 anchors. SDS
Tenmat FF109-300 2-hour Fire Rated Light Cover
The FF109X is the only two hour UL tested and approved fire barrier that can be used with a wide range of recessed lights to effectively prevent the spread of flames through a ceiling opening. Once a hole is made in the drywall to install recessed lights or speakers, the integrity of the construction and its ability to perform in a fire is reduced significantly, creating a potential fire hazard. This is the reason why the International Building Code states: “Where floor/ceiling assemblies are required to have a 1 or 2-hour fire resistance rating, recessed fixtures shall be installed such that the required fire resistance of the ceiling will not be reduced” The FF109X is two hour approved for every major ceiling assembly including gypsum, sheetrock, drywall, acoustical tiles and suspended ceilings with any joist spacing up to 24 inch on center. The enclosure is made out of an intumescent material which will be activated in case of a fire, stopping both, flame spread and heat transmission for two hours. Tenmat 2 Hour Fire Rated Light Covers are UL tested and approved for use with IC-rated recessed incandescent, fluorescent, LED light fixtures. TENMAT Fire Rated Light Covers can be used with most light manufacturer’s models and are suitable for new construction as well as remodel projects. In addition to its fire protection capabilities, the FF109X also exhibits excellent thermal and acoustical insulating properties to save energy and reduce noise. The flexible and lightweight nature of the covers makes installation quick and easy, reduces the stress put on the ceiling and significantly reduces labor costs compared to standard dry-walled box constructions. Data Sheet (PDF)