Additional information
| Size | 8" x 8", 12" x 12", 12" x 18", 14" x 24", 18" x 24" |
|---|
5 Gallon Bucket Heater
$410.27
Use the PowerBlanket bucket heater to heat 5 gallon buckets and pails to maintain a constant temperature in the product year round. This is important when using temperature sensitive products or those that should not be frozen. The bucket heater can be used to heat water, petroleum, chemicals, paint and food products and works on both metal and poly buckets and pails.
Wrap it in a Powerblanket and you’ll never use another band heater or blower again. The insulated full wrap design keeps the heat in and the cold out. Utilizing patented GreenHeat Technology, Powerblanket takes the hassle out of heating your temperature sensitive materials. Powerblanket bucket & pail heaters are more efficient and use less energy that conventional band heaters. Test results show Powerblanket to be significantly more effective than band heaters at warming and insulating drums, buckets, pails, gas cylinders, and kegs. Powerblanket is the fastest, easiest, and most affordable method for heating and maintaining the temperature of your industrial materials. New Rapid-Ramp heating technology cuts heat time in half.
- Approx Temp: 100 ± 10 F / 38 ± 5 C
- Blanket Dimensions: 16″ x 47″/ 40cm x 120cm
- Voltage: 120V
- Wattage: 60/120 ± 5%
- Amps: 0.50/1.00 ±5%
- Approx Weight: 4 lbs/2 kg
- Certified to UL/CSA/ETL safety standards
J&R Products offers FREE SHIPPING for all domestic orders that total over $50 and are shipping to the lower 48 states. If you are needing items shipped outside of this area, please give us a call at 1-800-343-4446 to complete your order.
Additional information
You may also like…
605 Bd Ft Foam Kit Warmer-5 Gallon Pail Warmer
The PW-005 pail warmer will warm a five gallon can or a 605 Bd Ft foam kit cylinder. It is made from heavy duty nylon CPAI 84 which creates a heat retaining flexible barrier. It is insulated with closed cell polypropylene with an enclosed heating element. It plugs into a 120V AC or 12V DC inverterusing a heavy duty industrial cord. It features a convenient cord storage pouch on the front with a velcro closure and adjustable cinch straps for a snug fit. It measures 11.5" high x 41" long. The internal temperature is controlled to maintain a constant temperature while only using 50 watts of power. *These are sold one per package, if you are purchasing for a 2 part foam kit you will need to purchase two.
205 Bd Ft Foam Kit Warmer-2 Gallon Pail Warmer
The PW-002 pail warmer will warm a two gallon can or a 205 Bd Ft foam kit cylinder. It is made from heavy duty nylon CPAI 84 which creates a heat retaining flexible barrier. It is insulated with closed cell polypropylene with an enclosed heating element. It plugs into a 120V AC or 12V DC inverter using a heavy duty industrial cord. It features a convenient cord storage pouch on the front with a Velcro closure and elastic top. It measures 8" high x 29" long. The internal temperature is controlled to maintain a constant temperature while only using 50 watts of power.
Related products
Polypropylene Tying Twine (4 Rolls)
850 Mono Beacon Polypropylene Tying Twine. 8,500 feet per tube, 34,000 total feet, each tube comes in it's own carrying box (4 tubes per case). Can be used to secure insulation batts or any general purpose tying applications. 4 ROLLS PER CASE SDS
4 mil Clear Construction Film
This clear polyethylene sheeting is a vapor barrier for walls and floors. Prevents condensation and energy loss. Sizes vary. SDS
Tenmat Recessed Light Cover
The Tenmat FF130E Recessed Light Cover is made out of a fire safe material and was specifically designed to protect your light fixture from insulation in the attic and to stop unwanted air leakage through your recessed light. The FF130E has been fire and thermally tested in accordance with UL1598 and IEC 60598-1 and can be used with IC, as well as Non-IC rated recessed lights (See installation instructions for maximum lamp wattage and types). Most recessed lights are not compatible with insulation and oftentimes start cycling on/off after they have been buried with cellulose, foam, fiberglass, etc. The lights' malfunction is a concern and a safety hazard. Pushing the insulation away is not an effective solution since it creates air passages in the building envelope and wastes energy. According to the department of energy, recessed lights account for 50% of the total thermal losses of a ceiling. Tenmat, the leading manufacturer of high-temperature engineering materials and fire protection components for recessed lights specifically developed the FF130E Recessed Light Cover to solve this problem and protect lights from insulation while simultaneously allowing the insulation to be continuous and uninterrupted over the whole area of the ceiling. Due to this improved air tightness and insulation, Tenmat users experience significant energy savings, noise reduction, and draft reduction. The FF130E covers are fit within seconds and do not require any assembly or special tools.
- Thermally tested according to UL 1598 for usage with IC and non-IC rated lights
- Fire tested in accordance with IEC 60598-1
- Saves energy by eliminating draft through your recessed light fixture
- Keeps flammable insulation at a safe distance from hot recessed lights
- Easy to fit - no assembly required
