Additional information
| Quantity | Single Pair, Case of 50 Pairs |
|---|
Previous product 
Back to products 
Attic Pulldown Ladder Jacket $95.00 – $97.00
Next product 
Graphite Powder $7.18
3M Particulate Cartridge Filter
NIOSH approved for environments containing certain oil and non-oil based particles.
- P100 particulate filter
J&R Products offers FREE SHIPPING for all domestic orders that total over $50 and are shipping to the lower 48 states. If you are needing items shipped outside of this area, please give us a call at 1-800-343-4446 to complete your order.
Additional information
You may also like…
3M Particulate Filter 5N11, N95 Respiratory Protection (Pack of 10)
- NIOSH approved for environments containing certain non-oil-based particles
- Use on top of 3M gas and vapor cartridges with 3M 5 1 retainer when particles are also present
- Use on top of 3M 6 3 filter holder and 3M 5 1 retainer to reduce particulate exposure
- Replaceable particle filter for cost savings
- Wide range of applications reduces inventory needs and training requirements
3M 6001 Organic Vapor Cartridge Filter
NIOSH approved against certain organic vapors. Use with 3M Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet filter holders.
- Organic vapor cartridge
- Swept-back design for enhanced field of view and balance
- Use with 3M Reusable Respirators
3M™ 60923 P100 Organic Vapor/Acid Gas Filter
- NIOSH approved for protection against certain organic vapors, acid gases and particulates
- Swept-back design allows an enhanced field of view and comfort
- Bayonet compatibility allows use with many 3M half and full facepiece designs
- Wide range of applications reduces inventory needs
- Simple installation and usage requirements reduce training needs
NIOSH approved against certain organic vapors, acid gases and particulates. Use with 3M™ Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet filter holders.
The 3M™ Organic Vapor/Acid Gas Cartridge/Filter 60923 P100 helps provide protection against certain organic vapors, acid gases and particulates in a variety of environments. The cartridge/filter combination may be used for respiratory protection from certain organic vapors, chlorine, hydrogen chloride, sulfur dioxide, hydrogen sulfide, hydrogen fluoride, and non-oil and oil particulate concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with quantitatively fit tested full facepieces. This cartridge/filter is not for use in environments that are immediately dangerous to life or health (IDLH). Recommended applications for the cartridge/filter include chemical manufacturing, laboratories, petrochemical, and pharmaceuticals. Inventory needs and training requirements for safety equipment are reduced because this respirator cartridge/filter selection works for many different applications. This cartridge/filter is commonly used in the following industries: chemicals, general manufacturing, and pharmaceuticals. This organic vapor/acid gas cartridge/filter works with 3M™ Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet attachment holders. The cartridge is NIOSH (National Institute for Occupational Safety and Health) approved for environments containing acid gases and non-oil and oil particulates. The cartridge has been assigned the color code “Magenta/Yellow” in the NIOSH system. Breathing organic vapors, acid gases and particulates can pose a risk to your health. NIOSH, a Federal government regulatory agency, has tested and approved the 3M™ Organic Vapor/Acid Gas Cartridge/Filter 60923 to help reduce exposure to certain organic vapors, acid gases and particulates.
3M™ Organic Vapor Cartridge/Filter 60921
NIOSH approved against formaldehyde, certain organic vapors, and particulates. Use with 3M Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet filter holders.
- NIOSH approved for protection against certain organic vapors and particulates
- Swept-back design allows an enhanced field of view and comfort
- Bayonet compatibility allows use with many 3M half and full facepiece designs
- Wide range of applications reduces inventory needs
- Simple installation and usage requirements reduce training needs
Related products
Two Worker Allegro Full Mask System with 100′ Hose
This Allegro full mask system provides a portable air source. The kit includes 2 full masks supplied air respirators, a 3/4 hp ambient air pump, and 100 feet of breathing air hose. The masks are comfortable with only soft silicone rubber touching the face. The lens is made from polycarbonate and meets ANSI Z87.1 requirements. The wide field of distortion-free vision is offered with anti-fog and anti-scratch coatings. Ambient air breathing pumps are designed to be used outside the contaminated work environment to bring clean, breathable air into a supplied air respirator. They are portable and oil-less, producing no carbon monoxide, oil vapors or oil mist, thus eliminating the need for carbon monoxide monitoring and alarm systems. All pumps come fully assembled with all filters, fittings, and couplers. Spec Sheet (PDF) Face Shield Parts Breakdown (PDF) Pump Parts Breakdown (PDF)
8″ x 25′ Hose for Ventilation Blower
Lightweight and retractable, this 8" diameter non-collapsible hose is designed for maximum air handling capabilities and built for dual direction flow with minimum friction loss. Vinyl and polyester materials with PVC coating make this single ply duct stand up to any rugged environment. Meets ASTM 227 specs.
Intruder Safety Glasses
Intruder Features:
- Economical lightweight glass offers superior protections.
- Exceeds the ANSI Z87.1 High Velocity Impact Standards.
- CAN/CSA Z94.3-07
- General purposes for indoor applications that require impact protection.
- Offers protection from excessive glare.
- Scratch-resistant lenses
- Provides 99% protection from harmful UV-A and UV-B rays.
- 100% polycarbonate lenses
