3″ EasyRoll® Adjustable Corner Finisher
$414.00
The TapeTech® EasyRoll® Adjustable Corner Finisher is used to perfectly feather both joint compound edges of internal corners in one pass. The Corner Finishers can be used for wall-to-wall internal corners or wall-to-ceiling corners. The “adjustable” feature of this tool refers to the ability to control the amount of spring pressure by engaging or disengaging one set of tension springs on the back of the corner finisher. Corner Finishers, also referred to as Angle Finishers or Angle Heads, are attached to a corner applicator (CA07TT or CA08TT) or the 14TT MudRunner® to quickly and professionally finish internal drywall corners. EasyRoll® Adjustable Corner Finishers have wheels to provide the smoothest action on the wall and are spring loaded to help compensate for slightly imperfect corners. Use with the FHTT Fiberglass Handle or the XHTT Extension Handle – not included.
- Wipes down excess mud in internal corners
- Embeds inside corner tape on walls and ceilings
- Finishes inside corners of walls and ceilings
Features
- Stainless Steel Frames
- Patented, positive Ball Retainer
- EasyRoll® Wheels
- Adjustable Springs
J&R Products offers FREE SHIPPING for all domestic orders that total over $50 and are shipping to the lower 48 states. If you are needing items shipped outside of this area, please give us a call at 1-800-343-4446 to complete your order.
Related products
EasyClean® Finishing Box
The TapeTech EasyClean® Finishing Box automatically dispenses the proper amount of joint compound and feathers the edges of butt joints and flat joints in one pass. The EasyClean Finishing Box helps produce professional results every time. The adjustable crown setting dial allows the user to easily adjust the amount of joint compound applied over the tape on the drywall joint. This is very helpful when progressing from the first finishing application to the second or third application. The pivoting axle helps to compensate when the drywall or sheetrock on one side of the joint is higher than the other side of the joint. The new EasyRoll™ wheel system allows you to expertly finish all types of outside corner bead up to two times faster than finishing by hand. EasyRoll™ wheels work with all types of outside corner bead including metal, paper-faced, vinyl and bullnose. EasyRoll™ wheels provide a shoulder to guide the finishing box along the corner bead without after-market attachments or damage to the axle. The shoulder of the EasyRoll wheels is more than three times wider than after-market products, making it easier to place, and keep, the finishing box on the corner bead. And EasyRoll™ wheels are engineered and designed to be perfectly aligned with the finishing blade, eliminating the need to tilt the finishing box like you must with common after-market wheel systems. EasyRoll™ wheels do not affect how the finishing box runs on standard flat joints. All TapeTech finishing boxes now feature EasyRoll™ wheels for finishing outside corner bead.
- Applies first coat of joint compound to embed tape at butt joints and flat joints on walls and ceilings
- Finishes butt joints and flat joints on walls and ceilings
- Feathers edges of butt joints and flat joints
- Anodized Aluminum Box
- Adjustable Crown Control
- Solid Brass Blade Holder
- Hardened Steel Blade
- Pivoting Axle
Inside Corner Roller
The TapeTech® Corner Roller quickly and accurately embeds the tape firmly into the internal corners of the drywall. Use the corner roller immediately after applying joint tape to the internal corner with the automatic taper. The corner roller forces excess joint compound out from behind the tape in preparation for the corner finisher. The TapeTech® Corner Roller features stainless steel rollers for crisp edges and long life. Use with the FHTT Fiberglass Handle or the XHTT Extension Handle – not included. NOTICE: A new stud design was implemented in April 2012. For information regarding model 15TTE manufactured prior to April 2012, please see the Discontinued Products page of the website. The schematic can also be viewed in the Learning Center.
- Embeds tape into compound at inside corners of walls and ceilings
- Forces excess joint compound out of corner in preparation for corner finisher/flusher to smooth
- Stainless Steel Wheels
- EasyClean Wheel Design
Wizard® Compact Finishing Box Handle
The new model 8000TT Wizard® handle from TapeTech® provides unmatched control, maximum access and eliminates the learning curve of using traditional finishing box brake handles. The Wizard is the only finishing box handle that places your hand directly over the pressure plate, reducing the effort required while providing superior control. The Wizard fits into the smallest closets or under stairs and is much safer for workers on scaffolding compared to using a finishing box handle of any other length. The Wizard isn’t limited to just tight spaces or scaffolds. The Wizard is the absolute fastest and easiest way to finish any joints, especially horizontal joints. The innovative design, including the ability to reverse the front handle, allows for multiple ergonomic hand positions to reduce worker fatigue and increase productivity. Every drywall finisher needs the Wizard in their toolbox!
TapeTech® Finishing Box Handle
The TapeTech® Finishing Box Handles attach to the TapeTech EasyClean®, MAXXBOX® or Power Assist® Finishing Boxes and provide control to cleanly sweep the boxes off the joint for a perfect finish.
- Attaches to TapeTech EasyClean® Boxes
- Attaches to TapeTech MAXXBOX®
- Attaches to TapeTech Power Assist® Boxes
- Anodized Aluminum Handle
- Adjustable Grip