12 Bd Ft 2-Part Low Pressure Spray Polyurethane Foam Handi Foam
A two-part low pressure spray polyurethane foam kit that is used to fill and insulate large voids or surfaces. Comes complete with dispensing wand and two tips.
Proper use of a NIOSH approved half mask respirator with organic vapor cartridges, safety glasses or goggles, nitrile gloves, and protective clothing is recommended for application of this product. This product is for PROFESSIONAL USE ONLY.
The International Building Code mandates that polyurethane spray foam be separated from the interior of the building by a 15-minute thermal barrier or other approved covering. DC315 passed certified NFPA 286 and UL 1715 by ETL over a variety of open and closed cell spray-applied urethane foams. It complies with all the requirements of 2006 IBC Section 803.2.1; 2009 IBC Section 803.1.2 and Section 2603.9; 2012 IBC Section 803.1.2 and Section 2603.10 "Special Approvals for Thermal Barriers over Foam Plastics". DC315 also meets the requirement as an Ignition Barrier per AC 377, Appendix X at an incredible spread rate of 400 sq. ft. per gallon.CharacteristicsFinish: FlatColor: Off-WhiteV.O.C.: (47 g/l)Volume Solids: 67%Drying Time: 77F & 50% RH To touch 1-2 hours to recoat 2 to 4 hoursType of Cure: CoalescenceFlash Point: NoneReducer/Cleaner: WaterShelf Life: 1 year (unopened)Packaging: 5 & 55 gallon containersShipping weight: 5 gallon pail - 58 lbs.55 gallon drum - 640 lbs.Application: Brush, roller, conventional and airless spraySDS
- Excellent adhesion on most substrates (except PTFE, PE and PP)
- High thermal and acoustical insulation
- Very good filling capacities
- Excellent mounting capacities
- Excellent stability (no shrink or post-expansion)
- Very precise application due to the foam gun system
- AAMA compliant