With Accessories, Without Accessories
$122.55 – $134.58
UL Classified polyurethane foam kits that meet ASTM E-84 Flame Spread requirements. Cylinder foams are dispensed with a dispensing wand or professional dispensing unit.
Yields based on theoretical calculations and may vary depending on ambient conditions and application:
Tack-free time: approximately 10 minutes
1″ bead at room conditions fully cures in 12-24 hours, cuttable in 1 hour.
Wear protective glasses or goggles, nitrile gloves, and protective clothing. Use in a well-ventilated area. This product is for PROFESSIONAL USE ONLY. Due to hazardous fees, this item may ship via semi.
The International Building Code mandates that polyurethane spray foam be separated from the interior of the building by a 15-minute thermal barrier or other approved covering. DC315 passed certified NFPA 286 and UL 1715 by ETL over a variety of open and closed cell spray-applied urethane foams. It complies with all the requirements of 2006 IBC Section 803.2.1; 2009 IBC Section 803.1.2 and Section 2603.9; 2012 IBC Section 803.1.2 and Section 2603.10 "Special Approvals for Thermal Barriers over Foam Plastics". DC315 also meets the requirement as an Ignition Barrier per AC 377, Appendix X at an incredible spread rate of 400 sq. ft. per gallon.CharacteristicsFinish: FlatColor: Off-WhiteV.O.C.: (47 g/l)Volume Solids: 67%Drying Time: 77F & 50% RH To touch 1-2 hours to recoat 2 to 4 hoursType of Cure: CoalescenceFlash Point: NoneReducer/Cleaner: WaterShelf Life: 1 year (unopened)Packaging: 5 & 55 gallon containersShipping weight: 5 gallon pail - 58 lbs.55 gallon drum - 640 lbs.Application: Brush, roller, conventional and airless spraySDS