Additional information
| Type | With Accessories, Without Accessories |
|---|
10lb & 16lb Hose Assembly
$43.00
For use with Handi-Foam systems.
J&R Products offers FREE SHIPPING for all domestic orders that total over $50 and are shipping to the lower 48 states. If you are needing items shipped outside of this area, please give us a call at 1-800-343-4446 to complete your order.
Additional information
You may also like…
16lb Polyurethane Foam Kit
UL Classified polyurethane foam kits that meet ASTM E-84 Flame Spread requirements. Cylinder foams are dispensed with a dispensing wand or professional dispensing unit.
- 1/4" bead size: 31,347 ft.
- 3/8" bead size: 13,914 ft.
- 1/2" bead size: 7,827 ft.
Tytan Professional Foam Cleaner
For use on any foam insulation applicator gun. SDS
Bottom Load Foam Gun
Spray gun designed for the application of single component polyurethane foam, packaged in pressurized cans and cylinders. The gun enables the user to adjust the product flow, thereby reducing waste. This gun easily converts to attach the cylinder hose to the top of the opening of the gun. Exchange the ball valve for the supplied universal basket to spray from foam canisters. Can be used with our 10# and 16# cylinder foam kits or any of our can gun foams. Easy to clean, nickel plated brass body. Stainless steel needle. Basket must be attached to the top of the spray gun for can foam use. Barrel length: 6" Total length of gun: 12"
3M™ Half Facepiece Reusable Respirator
3M™ Half Facepiece Reusable Respirator 6300 offers reliable and convenient respiratory protection and is suitable for many situations, helping provide protection against particulates and a wide variety of gasses and vapours according to NIOSH approvals. 3M™ Half Facepiece Reusable Respirators offer versatility for many environments and applications providing protection against particulates and a wide variety of gasses and vapours when used with approved cartridges and filters. When properly fitted and used with approved 3M™ cartridges and filters, helps provide respiratory protection from a variety of gasses, vapours and particulate hazards at concentrations up to 10 times the Permissible Exposure Limit (PEL). Not for use in environments that are Immediately Dangerous to Life or Health (IDLH).
- Reliable, convenient respiratory protection when combined with 3M™ Particulate Filters or Cartridges (such as organic vapour/acid gas cartridges) or dual airline system
- Available in 3 sizes (small, medium, large) to comfortably fit many faces
- Head harness assembly and spare parts available
- Comes with sealable storage bag
- For use with 3M™ Cartridges 6000 Series, 3M™ Filters 2000, 2200, 7000 or 5000 Series, or 3M™ Dual Airline Systems
- Comes with reclosable storage bag
Suggested Applications
- When properly fitted and used with approved 3M™ Cartridges and Filters, helps provide respiratory protection from a variety of gases, vapors and particulate hazards at concentrations up to 10 times the Permissible Exposure Limit (PEL). Not for use in environments that are immediately dangerous to life or health (IDLH).
Related products
TYTAN Fill All Insulating Foam Sealant 24 oz
TYTAN Fill All insulating foam sealant is made with Smart Foam technology. Smart Foam Technology makes products more versatile while offering superior yield, adhesion, R-value, and sealing properties. All TYTAN foam sealants are safe for use around windows & doors, as they expand toward the area of least resistance. With Fill All, you no longer need to buy multiple foams depending on the size of the gap you’re filling.
- Fills all gaps between 1/4"-3"
- Safe for use around windows & doors
- Adheres to most construction materials like wood, metal, masonry, glass, and most plastics
- Third-party testing confirms that it does not emit any harmful MDI emissions during application
- Contributes to LEED energy savings
Sys 27 Handi-Foam Refill Low Pressure Spray Polyurethane E-84 Class 1 Foam
Refillable Low Pressure Spray Polyurethane Foam Systems. Proper use of a NIOSH approved half mask respirator with organic vapor cartridges, safety glasses or goggles, nitrile gloves, and protective clothing is recommended for application of this product. The product is for PROFESSIONAL USE ONLY. SDS PART A SDS PART B
DC-315 Thermal Barrier Coating
The International Building Code mandates that polyurethane spray foam be separated from the interior of the building by a 15-minute thermal barrier or other approved covering. DC315 passed certified NFPA 286 and UL 1715 by ETL over a variety of open and closed cell spray-applied urethane foams. It complies with all the requirements of 2006 IBC Section 803.2.1; 2009 IBC Section 803.1.2 and Section 2603.9; 2012 IBC Section 803.1.2 and Section 2603.10 "Special Approvals for Thermal Barriers over Foam Plastics". DC315 also meets the requirement as an Ignition Barrier per AC 377, Appendix X at an incredible spread rate of 400 sq. ft. per gallon.
Characteristics- Finish: Flat
- V.O.C.: (47 g/l)
- Volume Solids: 67%
- Drying Time: 77F & 50% RH To touch 1-2 hours to recoat 2 to 4 hours
- Type of Cure: Coalescence
- Flash Point: None
- Reducer/Cleaner: Water
- Shelf Life: 1 year (unopened)
- Packaging: 5 gallon pail
- Shipping weight: 5 gallon pail - 58 lbs
- Application: Brush, roller, conventional and airless spray
Handi-Foam 605 Bd. Ft. 2-Part Low Pressure Spray Polyurethane Foam Kit with 15′ hose
Handi-Foam two-part low-pressure spray polyurethane foam kit that is used to fill and insulate large voids or surfaces. Handi-Foam® provides excellent insulation by creating a continuous air barrier helping you seal your building's envelope. It is dispensed using the patented Handi-Gun® dispensing unit for accurate and precise applications. Handi-Foam Quick Cure assists in obtaining ENERGY STAR® rating and/or LEED credits. With excellent adhesion properties, Handi-Foam® Quick Cure foam will not let you down. CANNOT BE SOLD IN CA, CO, DE, MA, MD, ME, NJ, NY, VA, VT AND WA Kit Includes:
- Component A
- Component B
- Hoses
- Dispensing Gun
- 8 Spray Nozzles
- 15' hose
- Temperature: Spray foam products are temperature sensitive. You can spray this kit in colder outdoor temperatures, the key is to keep the core temperature of the tanks within the proper range of 75-85°F.
- Change Nozzles: It is important to change the nozzle after you stop spraying for more than 30 seconds. Failure to change nozzles may result in damage to the spray gun.
- Reuse Nozzles: It is possible to clean and reuse a nozzle 2-3 times. As soon as you are done spraying, remove the nozzle and drop it in a can of acetone. You can also use our Handi-Cleaner to clean out uncured foam.
- Safety Considerations: Customers that purchased item also purchased a Tyvek suit with hood, respirator and filters, goggles, and 2 pairs of nitrile gloves.
- Application: Use a slow, steady, and smooth motion to spray a continuous layer when applying the foam. Spray what appears to be just under a 1/4" thickness and it will expand and cure to roughly 1 inch. Apply additional layers until desired thickness is achieved, allowing at least 10 minutes between layers.
- Clean Up: You can clean up uncured foam with Handi-Cleaner. Once the foam is fully cured, you will have to remove it by mechanical means.