Showing 73–84 of 216 results

Show sidebar

Cool 2400 Machine w/ 13 Amp S.I. Quadruple Blower

Call for Pricing
The Cool Machine 2400 series insulation blowing machine provides an economical, high production insulation blowing machine with low power requirements and reduced weight/size in your truck or trailer system. This unit is all-fiber and used in attic blow, dense-pack, sidewall, wall spray, and fireproofing applications. This unit comes with 13 amp quad blower, single input.
  • Large 15 cu./ft. hopper capacity fiber storage
  • Production rates per hours: Cellulose 3000 lbs, Fiberglass 1000 lbs, Rockwool 1800 lbs
  • Stainless slide-gate control provides precise control of fiber
  • High-quality powder coating provides a long lasting corrosion resistant finish
  • Modular design with see-thru access panels for quick troubleshooting and maintenance
  • Slow speed positive feed 'scalping' augers extend component life while increasing safety
  • Large 12"x12" quick release airlock is a durable, easily serviced component
  • High-speed stainless shredder maximizes fiber conditioning, coverage, and production
  • High torque (1250 in./lb.) motor/reducer drive provides surplus power
  • #50 chain and hardened sprockets are rugged, corrosion resistant, and positive driving
  • 150 ft. remote cord with cord hanger offers convenient handling of the remote device
  • Dimensions: 58" L x 22" W x 48" H
  • Weight: 720 lbs (double blower)

Cool 27″ Aluminum Stud Scrubber

$875.00
This wall scrubber is an important tool that is used to remove excess spray-on insulation flush with the wall studs, allowing for easy installation of drywall. The Cool stud scrubber uses a "U" frame technology. It is ultra light-weight (9.8lbs) reducing operator fatigue. The balanced universal handle allows convenient reach of 10 foot ceilings and comfortable reach from ladders or scaffolds. the hybrid roller design combines 'edge cutting' performance with two roller supports, offering extended bearing and roller life. The reduced roller diameter requires reduced motor power and eliminates fiber thrown onto the operator. 1/8HP TENV motor comes sealed to extend motor life. Quick-change rollers can be replaced in minutes on the job site - no tools needed. 27" Wide x 35" Long

Cool 700 Insulation Blowing Machine w/ 8 amp blower

Call for Pricing
The Cool Machine model 700 is designed for the ultimate in portability and low power requirements. Its compact size with easy hopper removal allows for easy transport and handling in any vehicle. This standard insulation blowing machine is a great choice for the do it yourself installer.
  • On/off switch at the base of machine and is matched with a 120 volt, 8 amp 2-stage blower
  • Quick release auger provides easy access to airlock seal replacement and service
  • Single input 120 volt, 15 amp., power supply required, requires a 4,000 watt or larger generator
  • #40 nickel plated chain and hardened sprockets are rugged and corrosion resistant
  • Dual 'scalping' auger increase fiber conditioning while providing consistent feed
  • 950 pounds an hour cellulose, 400 pounds an hour fiberglass, 600 pounds an hour rockwool
  • Quick-release hopper for fast access to airlock with large handles for easy handling & transport, 7.5 cubic/ft hopper capacity
  • High-quality powder coating provides a long lasting, scratch and corrosion resistant finish
  • Overall dimensions: 17" W x 24" L x 48" H (Base unit 17" W x 24" L x 17" H)
  • Weight: 200 lbs (90 kg)
  • Note: This standard unit does not come with a remote or blower control, see SKU # CM-712 for the deluxe model

Cool 700 Insulation Blowing Machine with 150′ remote

Call for Pricing
The CoolMachine model 700 insulation blowing machine is designed for the ultimate in portability and low power requirement. Its compact size with easy hopper removal allows for easy transport and handling in any vehicle. This deluxe model features:
  • On/off switch at the base of machine and is matched with a 120 volt, 13 amp 2-stage blower
  • Quick release auger provides easy access to airlock seal replacement and service
  • Single input 120 volt, 15 amp., power supply required, requires a 4,000 watt or larger generator
  • Quick release auger for easy access to airlock seal replacement and service
  • Dual 'scalping' auger increases fiber conditioning and provides positive feed to airlock
  • 950 pounds an hour cellulose, 400 pounds an hour fiberglass, 600 pounds an hour rockwool
  • Quick-release hopper w/ large handles for easy handling & transport, 7.5 cubic/ft hopper capacity
  • This deluxe model includes 150' dual function (3 positions) remote control cord with cord hanger
  • This deluxe model includes a slide gate and variable speed blower control to provide precise control of fiber
  • #40 nickel plated chain and hardened sprockets are rugged and corrosion resistant in addition to the high-quality powder coating that provides a long lasting, scratch and corrosion resistant finish

Cool Air Pressure Gauge

$88.95
The pressure gauge is to check your P.S.I. at the machine or at the end of the hose.
This gauge is compatible on any insulation blowing equipment.

Cool Machines 2400 16 Airlock Seals 12″ Rhinohide

$207.45
This set of seals is for the Cool Machines CM2400 with the upgraded 16 airlock.

COOL Stud Scrubber 3/8″

$8.67
Replacement scrubber for the COOL Machines stud scrubber.

COOL Stud Scrubber 55″ Belt

$14.53
Replacement belt for the COOL Machines stud scrubber.

COOL Stud Scrubber Roller

$155.96
Replacement roller for the COOL Machines stud scrubber.

COOL Vacuum Economy Saver

Call for Pricing
Extend the life of your vacuum blade, chamber engine as well as collection bags with the Cool Vacuum Saver. Weighs approx. 60 lbs. This vacuum saver is for vacuums smaller than 23 HP.

COOL Vacuum Impeller

$390.00
Impeller for Cool Vacuum CV-230 ONLY FOR COOL VACUUMS Impellers for other brands available, call for information, pricing and availability.

COOL Vacuum Saver 23 HP

Call for Pricing

Extend the life of your vacuum blade, chamber engine as well as collection bags with the Cool Vacuum Saver. Weighs approx. 80 lbs. This vacuum saver is for vacuums 23 HP. Pneumatic wheels.