Close
5 Gallon Bucket Heater
Use the PowerBlanket bucket heater to heat 5 gallon buckets and pails to maintain a constant temperature in the product year round. This is important when using temperature sensitive products or those that should not be frozen. The bucket heater can be used to heat water, petroleum, chemicals, paint and food products and works on both metal and poly buckets and pails.
Wrap it in a Powerblanket and you'll never use another band heater or blower again. The insulated full wrap design keeps the heat in and the cold out. Utilizing patented GreenHeat Technology, Powerblanket takes the hassle out of heating your temperature sensitive materials. Powerblanket bucket & pail heaters are more efficient and use less energy that conventional band heaters. Test results show Powerblanket to be significantly more effective than band heaters at warming and insulating drums, buckets, pails, gas cylinders, and kegs. Powerblanket is the fastest, easiest, and most affordable method for heating and maintaining the temperature of your industrial materials. New Rapid-Ramp heating technology cuts heat time in half.
- Approx Temp: 100 ± 10 F / 38 ± 5 C
- Blanket Dimensions: 16" x 47"/ 40cm x 120cm
- Voltage: 120V
- Wattage: 60/120 ± 5%
- Amps: 0.50/1.00 ±5%
- Approx Weight: 4 lbs/2 kg
- Certified to UL/CSA/ETL safety standards
Close
55 Gallon Drum Heater Wrap with Thermostat Control (Set of 2)
For use with the 55 gallon drum refillable foam kits. It is sized for a 55 gallon drum with a built in thermostat of 160 degrees. It comes with adjustable straps to ensure proper fit of larger or smaller 55 gallon barrels. The drum heaters come ready to use. Unroll, wrap around your barrel, and plug into any outlet. The blankets weigh only 13 pounds and wrap around the entire barrel. This produces a fast, even, consistent heat. The built in thermostat will ensure you don't over/under heat your material. Each blanket has a 6 ft male end cord allowing five of these blankets to be plugged together on one single 20 amp outlet. Min allowable temp for guaranteed results is -40 degrees F with adjustable thermostat controller w/ heat probe.
120 volts/960 watt/8.0 amp (5 blanket maximum per 20 amp plug)
ETL Certified to UL/CSA Standards
Set of 2 Wraps
Close
605 Bd Ft Foam Kit Warmer-5 Gallon Pail Warmer
The PW-005 pail warmer will warm a five gallon can or a 605 Bd Ft foam kit cylinder. It is made from heavy duty nylon CPAI 84 which creates a heat retaining flexible barrier. It is insulated with closed cell polypropylene with an enclosed heating element. It plugs into a 120V AC or 12V DC inverterusing a heavy duty industrial cord. It features a convenient cord storage pouch on the front with a velcro closure and adjustable cinch straps for a snug fit. It measures 11.5" high x 41" long. The internal temperature is controlled to maintain a constant temperature while only using 50 watts of power.
*These are sold one per package, if you are purchasing for a 2 part foam kit you will need to purchase two.
Close
8″ Black Dragon Batt Knife
Hardened high carbon chrome vanadium steel blade. Ground and tempered to precise tolerances. Soft-grip handle with built in finger guard to protect fingers from cuts.
Close
AccuBlock (50 Count Bundle)
AccuBlock How The AccuBlock System Works The advantages of using the AccuBlock system:
- Designed Specifically for Spray Foam Applications
- Efficient Spray Template at the Top Plate
- Will not support Mold or Mildew Growth
- Quick & Easy Installation
- Designed for Unventilated Attics
- No costly callbacks
- Increased Speed and Efficiency of Installation
- Green Listed
- Reduced Labor
- No costly callbacks
- Meets EnergyStar Thermal
- Bypass Checklist Requirements
- Easily Adapts for Ventilated Attic Requirements
How The System Works (See Diagram):
The AccuBlock system creates a wind barrier from the top plate to the roof sheeting. This then allows for "Spray Applications" to be apply material directly to the AccuBlock and up the roof sheeting; assuring a wind free, sealed attic. Can only purchase in 50 count bundles.
50 AccuBlock per bundle SDS
Close
Adaptors
Dura-Stilt replacement parts
These adjustable height stilts are the top of the line from the Dura-Stilt Corporation. Spring tension individually adjustable for natural leg movement to give exactly the right "feel". Telescoping legs slide smoothly for quick and easy adjustment without tools. Includes strap-on shoe adapters.
Close
Air Conditioner Cover
Heavy gauge vinyl air conditioner covers fit most window units. Keeps out draft and dirt. Provides modest insulating properties. Straps and fasteners included. SDS
Close
Aluminum Insulation Barrier – 50′ x 20″
The Aluminum Insulation Barrier can be used around recessed lights and other heat-producing fixtures or any application where flashing is used. These barriers are made from the same lightweight aluminum material as our Insul-Shield product, only without the perforations. Each roll measures 20" high and 50' long and can be cut to size, 30 guage. Installation is quick, easy and safe to use with cellulose, fiberglass and rockwool insulation. SDS
Close
Aluminum Multi Purpose Ladder
Reliable, quick-activating snap-lock hinges permit easy, one-man set-up. Provides stability and versatility for the most demanding jobs. Easy to use Heavy-duty locking pins provide a secure assembly of ladder sections regardless of configuration. Regular step ladders also.
Due to size, this item must be shipped via semi. Signature required at time of delivery. Due to expense, call for freight estimate.
Close
Arch Strap w/ Buckle
Dura-Stilt replacement parts
Close
Batt Knife Sheath
Sheaths for both 6" and 8" batt knives. Select size below.
BLUECOR™ Extruded Polystyrene Foam Insulation
BLUECOR™ Extruded Polystyrene Foam Insulation provides the moisture resistance and air barrier advantages of thicker insulations, at a more affordable price. When the insulation value of a thicker product is not required, BLUECOR™ insulation is an excellent choice for use with vinyl, steel or aluminum siding.
BLUECOR™ Extruded Polystyrene Foam Insulation is a specially formulated 1/4" extruded polystyrene board sealed between select facing materials, and produced in continuous 50' by 4' fanfold sections.
Available with a variety of film facings and thicknesses, BLUECOR™ insulation can meet high-performance requirements in residential structures, and is appropriate for: • Residing applications • New frame wall construction behind siding • Exterior basement walls.
Prices vary for AZ, CA, NV, OR, WA Product Brochure SDS
